Setting the serving size
The flavor of a coffee beverage depends not only on the type of coffee, but also on the quantity of water used. You can adjust the amount of water used for each portion of espresso, coffee or hot water to suit your cup size and the type of coffee used.
For beverages prepared with milk, you can also adjust the milk and milk froth ratio in addition to the espresso or coffee size. You can also program the portion sizes of hot milk and froth.
There is a maximum amount which can be programmed for each type of drink. Preparation stops when this is reached. The maximum portion size possible for that type of beverage will then be saved.
The changed beverage size is always stored in the current profile. The name of the current profile is shown at the top left of the display.
There are two ways to program the portion amount:
–Using the beverage keys if you prepare a coffee beverage, or
–Selecting "Beverage size" in the "Parameter" menu.
Tip: You can cancel the amount programming while "Stop" is displayed.
If there is insufficient water in the water tank during preparation, the coffee machine will stop the programming. The beverage amount will not be saved.
Setting the serving sizes while preparing beverages
Setting the serving sizes for Espresso , Coffee and Lungo coffee
^Place the desired cup under the main dispenser.
^Tap , and until the display shows "Change".
The desired beverage is prepared and the display shows "Save".
^Once the cup is filled to your desire, tap the OK button.
The portion size programmed will now be dispensed every time that particular beverage is selected.
30