Cleaning clogged milk pipework
^Slide the hoses back onto the angle section and reinsert it. Make sure that the bridge on the angled section faces down.
^Reinsert the air intake hose into the opening c.
Step 4: Milk valve maintenance
^Tap .
^Tap the arrow key until "Maintenance" is highlighted. Tap the OK button.
^Tap the arrow keys until "Condition milk valve" is highlighted. Tap the OK button.
The milk valve will go into maintenance position.
Important! Before you confirm "Leave maintenance position" with "OK", you must remove the cleaning brush. Otherwise, the coffee machine will be damaged.
Step 3: Cleaning the milk pipework in the main dispenser
^Remove and disassemble the dispensing unit as described in "Cleaning and care – Main dispenser".
^Rinse all parts carefully under running water.
Use the cleaning brush to clean all parts carefully. Do not use a needle or similar object to avoid piercing the silicone parts.
^Reassemble the dispensing unit and reinsert it into the main dispenser.
^Replace the cover.
^Insert the brush into the milk valve. Move the brush back and forth.
^Tap the OK button.
The milk valve will move into the stan- dard position and the milk lines are rinsed.
70