Cleaning and care
^Clean the surface of the main dispenser with a damp sponge cloth.
^Now reassemble the dispensing unit in reverse order.
Make sure that the upper connecting piece a audibly clicks into place. Push firmly when inserting the dispensing nozzles b into the dispensing unit.
^Reinsert the dispensing unit into the main dispenser.
^Replace the cover.
Milk valve maintenance
You should put the milk valve in maintenance mode once per week to ensure good quality milk froth.
^Tap .
^Tap the arrow key until "Maintenance" is highlighted. Tap the OK button.
^Tap the arrow keys until "Condition milk valve" is highlighted. Tap the OK button.
The milk valve will go into maintenance position.
Important! Before you confirm "Leave maintenance position" with "OK", you must remove the cleaning brush. Otherwise, the coffee machine will be damaged.
^Insert the brush into the milk valve. Move the brush back and forth.
^Tap the OK button.
The milk valve will move into the stan- dard position and the milk lines are rinsed.
50