Miele 9741510 installation instructions Unsatisfactory result

Frequently asked questions

Unsatisfactory result

Fault	Possible cause and solution
The consistency of	The milk temperature is too high. Good milk froth can only
the milk froth is	be prepared with cold milk (under 55°F/13 °C).
unsatisfactory.	^ Check the milk temperature in the milk container.
	The milk pipework or the air intake hose is clogged.
	^ Follow the instructions in chapter "Cleaning clogged milk
	pipework".
The grinding of the	The coffee bean container has run empty during the
coffee beans	grinding process.
sounds louder	^ Fill the coffee bean container with fresh beans.
than usual.
	There might be pebbles mixed in with the coffee beans.
	^ Turn the coffee machine off immediately. Contact
	Technical Service.
Espresso or coffee	The grind level is too coarse.
flows into the cup	^ Set the grinder control to a finer setting (see "Adjusting the
too quickly.	grinder setting").
Espresso or coffee	The grind level is too fine.
flows into the cup	^ Set the grinder control to a coarser setting (see "Adjusting
too slowly.	the grinder setting").
The coffee or	The cup has not been pre-heated.
espresso is not hot
	The brewing temperature is set too low.
enough.
	^ Set a higher brew temperature (see "Brewing
	temperature").
	The brew unit filters are blocked.
	^ Remove the brew unit and clean it by hand (see "Brew
	unit" ).
	^ Degrease the brew unit (see "Brew unit").

66