Descaling
^Fill the water tank to the mark with lukewarm water.
^Add two descaling tablets to the water.
Please note the mixing ratio for the descaling tablets. It is important that you fill the water container with enough water. Too little water can cause the descaling program to be stopped prematurely.
^Reinsert the water tank and close the unit door.
^Follow the instructions on the display.
When the display shows "Rinse water container and fill with fresh tap water up to the descaling symbol ", proceed as follows:
^Rinse the water tank carefully with clean water. Make sure that no descaling agent is left in the water tank. Fill clean tap water up to the mark .
Also empty the waste unit.
The descaling process is complete when the display reads, "Program finished".
^Tap the OK button.
The descaling program is now complete and beverages can be prepared in the machine again.
When descaling the machine, be sure to wipe off any splashes of descaling agent immediately! These could damage the surfaces.
After descaling the machine, carefully clean the water tank and the drip tray to remove all traces of descaling agent.
How to descale before prompted
^Tap .
^Tap the arrow key until "Maintenance" is highlighted. Tap the OK button.
^Tap the arrow keys until "Descale the system" is highlighted.
The descaling program cannot be canceled once it has started. The program has to be carried through to the end.
^Tap the OK button.
The descaling process will start.
59