Cleaning clogged milk pipework
To reassemble the lid:
^First insert the gasket in the lid. Then insert the milk intake pipe into the gasket.
Make sure not to slide the beveled end of the milk intake hose into the gasket.
Step 2: Cleaning the air intake hose and angle section in the door
Do not use a needle or similar sharp item. These can cause damage to the parts.
^Pull the main dispenser all the way down.
^Open the service cover on the back of the door.
^First detach the air intake hose a from the opening c. Then pull off the angled section b.
^Pull both hoses out of the angled section.
^Clean the air intake hose a using the cleaning brush supplied. "Blowing through" can also shake loose clogged residue.
^Clean the opening for the air intake hose c in the door.
^Clean the angle section b under running water. If necessary, replace it with the supplied spare part.
^Insert the brush into the milk hose d. Move the brush back and forth until all milk residue has been removed.
69