Miele CVA 2652 installation instructions Descaling the coffee system

Page 47

Descaling the coffee system

The descaling cannot be interrupted once the OK button has been pressed. The process must be allowed to run through to completion.

This is a safety feature to ensure the process will be completed. Descaling is important to increase the life of the machine and to ensure the best results possible.

The display will guide you through the descaling process. Follow the prompts (for example, empty drip tray, fill water tank, etc.).

Do not skip any steps or remove a part unless prompted by the display. This will cause the program to fault and descaling will restart.

^Remove the water tank and fill it to the mark k with lukewarm water. (Do not under fill the water tank, this will cause the descaling process to end prematurely.)

^Add 2 descaling tablets to the water. Allow the descaling tablets dissolve completely, before closing the lid and placing the water tank back into the appliance.

^When the message appears in the display, remove the capsule plate and replace it with the colored descaling funnel.

^Place the waste container under the steam valve and coffee dispenser to collect the waste water.

There will be at least 5 minutes before the descaling process starts. This time is needed for the descaling tablets to completely dissolve in the water. If the process takes longer than 5 minutes to start, the appliance is too warm.

During the descaling process, a small amount of water and descaling agent will exit the steam valve and coffee dispenser. This is followed by an activation period, before more descaling agent is drained. A message in the display will appear to let you know approximately how long the descaling process will take.

47

Image 47
Contents Operating and Installation Instructions Coffee System CVA Contents Contents Children Proper useTechnical safety Use Save These Instructions and Review Them Periodically Front view Guide to the coffee systemInterior view Display DisplayTouch controls Before the first use Setting the clockSwitching on First steps to useFilling lines with water Switching offOpen the appliance door Filling water and coffee capsulesFilling the water tank Removing the coffee capsules Filling the coffee capsule carouselRename type Allocating various coffee typesAllocating the coffee types Select typeDelete type Chamber symbols in the displaySaving an entry Not saving an entryTo pre-warm with steam Making coffee / espressoPre-warming the cups To pre-warm with hot waterInterrupting preparation Coffee and EspressoDouble portion Preparing hot milk, frothed milk, and Cappuccino Frothing milk into a cup Heating milk Frothing milk in the cappuccinatoreRinsing the lid After useSetting the serving sizes using the OK button Setting serving sizesSetting the serving sizes via Settings C Selecting a user profile Setting a user profileUser profiles Revert Changing a user profileDeleting a user profile Making coffee / espresso with user profiles Setting serving sizes for user profilesTime of day SettingsSetting the time of day Selecting a languageDisplay Setting the timerSwitching on at a preset time Activate Switching off afterSwitching off at a preset time Steam system Lighting Adjusting the brightnessLighting Setting the switch-off time Info displaying No. of drinks VolumeTemporarily deactivating the system lock System lockWater hardness Activating/Deactivating the system lockRestore factory default settings User profile Frequency What needs to be done? OverviewDishwasher safe Cleaning and careDo not clean in the capsule plate opening. Danger of injury Rinsing the SystemWaste container Water tank Drip tray with gridCapsule carousel and tray Plastic and metal drip traysInterior and appliance door Coffee dispenser coverSteam valve Capsule plateWipe any spills from descaling im- mediately ExteriorCappuccinatore Select Settings F from the main Menu. Confirm with OK MaintenanceDescaling the coffee system Descaling the coffee system Descaling before prompted Unit suddenly turns off Possible fault Solution Frequently asked questionsMachine problems Display remains dark Possible fault SolutionDisplay is hard to read Door will not open or close Possible fault SolutionTime of day needs to be reset Possible fault Solution Preparing / Dispensing problems Steam smells like rubber Coffee dispensing is interrupted Possible fault SolutionAppliance does not rinse when turned on Preparing time and amount of coffee is very different Espresso / coffee is not hot enough Possible fault SolutionCoffee is too weak Possible fault Solution Coffee resultsDescaling process was started accidently There is water in the waste containerFault messages What if F 72 appears in the display? Removing a jammed capsuleWhat if F 75 appears in the display? What if F 76 appears in the display? MieleCare After sales servicePage Installation instructions Disposal of an old appliance Caring for the environmentDisposal of packing material This Appliance Must be Grounded Electrical connectionInstallation options InstallationInstallation With 3/4 19 mm side panels InstallationInstallation into a tall cabinet Coffee glossary Espresso range Dulsão do Brasil gold Pure Origin Espresso rangeIndriya from India sage Rosabaya de Colombia roseDecaffeinato Lungo coral Lungo rangeFortissio Lungo teal Vivalto sky blue