Miele F1411VI installation instructions Exchanging the water filter, Water filter

Page 29
Exchanging the water filter

Water filter

Exchanging the water filter

^Push in and rotate the filter cap on the base panel of your appliance counterclockwise 180°, 1.

^Pull the used filter cartridge out of the appliance, 2.

^Remove the cap from the used filter, 3.

^Take a new filter cartridge out of the packaging and remove the protective cap.

^Push the cap onto the new filter cartridge, 4.

^Push the filter cartridge with cap, in a horizontal position, all the way into the opening in the base panel, 5.

^Rotate the filter cartridge clockwise 180° until the cap is in a horizontal position, 6.

The filter change needs to be confirmed before the "filter" indicator will go out. See "Re-setting the filter indicator".

Whenever you replace the filter, the system must be re-set. This will ensure the indicator light for the next filter change will come on at the right time.

29

Image 29
Contents en - US, CA Operating and Installation Instructions Freezer FContents Contents Electrical Safety IMPORTANT SAFETY INSTRUCTIONSInstallation Disposal of your old appliance SAVE THESE INSTRUCTIONSa Door shelves height adjustable Guide to the freezerb Shelves height adjustable c Ice cube maker f Main switch to turn the appliance On/Off g Freezer basketsa Access button p activates the control panel Control panele Sensor button for the temperature and door alarm f Water filter change indicatorTurning the appliance On/Off Before using for the first timeBefore use Custom settings SettingsUsing the settings Turning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Setting the temperature Setting the temperatureTemperature unit Fahrenheit/Celsius Freezing food Using the freezer efficientlyCooling drinks quickly DefrostingSuitable packing material Freezing tipsPacking tips Unsuitable packing material SuperCool SuperCoolTurning off the ice cube maker Ice cube makerTurning on the ice cube maker Automatic defrost Adjusting the door shelves Adjusting the interior fittingsMoving the shelves Freezer basketsReplacing the ice cube container Ice cube containerCleaning the interior and accessories Cleaning and careBefore cleaning Ventilation slits After cleaningDoor seals Aluminum framesUpper lighting Changing the light bulbSide lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter Water Treatment Device Filter Performance Data SheetCertificate Number State of California Department of Public HealthUsing Replacement Cartridge Performance Data Sheet For Filter ModelFailure to do so may void warranty To a capacity of 739.68 gallons 2800 litersFrequently asked questions Frequently asked questions Frequently asked questions will not switch on Problems with the ice makerThe ice cube maker The ice cube maker issmall The ice cubes areThe ice cubes have an unpleasantFrequently asked questions Brrrrr The appliance is making noisesBlubb, blubb ClickMieleCare After sales servicePage Installation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Installation site InstallationBase Installation nicheFurniture/fixtures VentilationCustom door panels Installation optionsAppliances attached together using the Merging Kit Single columnInstallation with partition using the Merging Kit Side panelsInstallation with partition without using the Merging Kit from 5/8 16 mm to 6 5/16 160 mmNiche dimensions DimensionsDoor dimensions open Power supply and water connection1. Power supply 2. Water connection 525 mmBefore you begin Installing the applianceBefore installation Check the installation nicheRemoteVision module installation Mounting Accessories Preparing the installation nicheAnti-tip brackets Securing an alternative anti-tip device Unscrew the plinth Sliding the appliance into the installation nicheAlign the custom door with a level Aligning the applianceAttaching the appliance to the installation niche Open the appliance door Preparing the custom door Mark the distance X on the back-side of the custom door Attaching and aligning the custom door front Attaching the covers Attach the plinth to the appliance Attaching the toe-kick coverMounting the air separator Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel MasterCool control panel options for RemoteVision Page Page M.-Nr F 1411 For the most updated manual see the Miele web siteAlteration rights reserved