Installing the appliance
Sliding the appliance into the installation niche
^ Unscrew the plinth. |
^To protect the corners of the installation space, attach the supplied edge protector a on both sides with adhesive tape.
^Plug the appliance into the power outlet b.
The plug of the appliance should be easily accessible after installation. If the plug is not accessible after the appliance has been installed, disconnection from the power supply should be completed via the circuit breaker.
In the case of
^To prevent the power cord from becoming caught:
Tie a piece of string to the middle of the power cord and feed it forward under the appliance. When sliding the appliance in, pull the cable forward c.
^Carefully slide the appliance into the space until the
If resistance is felt when attempting to slide the appliance into the installation niche - for example, because the floor is uneven,
^Turn the rear adjustable wheels slightly outward (see "Aligning the appliance"), then push the appliance in.
Be careful not to damage the water pipe or power cord attached to the floor.
^Remove the edge protector a.
57