Miele F1411VI installation instructions Base, Furniture/fixtures, Ventilation, Installation niche

Page 46
Base

Installation

Base

A fully loaded appliance is very heavy. The load-bearing capacity of your floor must meet the following requirements:

F 1411 Vi . . . . . . . . . . . 584 lbs (265 kg)

To ensure that the appliance is installed securely and functions properly, the base must be flat, level and made of a hard, rigid material.

If in doubt, contact Miele.

Furniture/fixtures

The new appliance will be mounted securely to adjacent and overhead furniture/fixtures.

For this reason, it is essential that all attachable furniture/fixtures be connected securely to the floor or wall by a suitable means.

Ventilation

The air intake and outlet must not be blocked or covered in any way. They also need to be dusted/cleaned on a regular basis.

Installation niche

To ensure safe, trouble-free installation and the best possible cosmetic result, check to be sure that the installation space complies with the installation dimensions. See "Niche dimensions".

The side walls of the installation cavity must be plumb.

The minimum thickness of the side walls and the top wall must be 5/8" (16 mm).

The minimum thickness of the toe-kick panel must be ½" (13 mm). A thickness of 3/4" (19 mm) is recommended.

46

Image 46
Contents Operating and Installation Instructions Freezer F en - US, CAContents Contents IMPORTANT SAFETY INSTRUCTIONS Electrical SafetyInstallation SAVE THESE INSTRUCTIONS Disposal of your old applianceb Shelves height adjustable c Ice cube maker Guide to the freezera Door shelves height adjustable f Main switch to turn the appliance On/Off g Freezer basketse Sensor button for the temperature and door alarm Control panela Access button p activates the control panel f Water filter change indicatorBefore use Before using for the first timeTurning the appliance On/Off Using the settings SettingsCustom settings Turning the button sound On/Off Turning off for longer periods of time Temperature alarm AlarmDoor alarm Setting the temperature Setting the temperatureTemperature unit Fahrenheit/Celsius Using the freezer efficiently Freezing foodDefrosting Cooling drinks quicklyPacking tips Unsuitable packing material Freezing tipsSuitable packing material SuperCool SuperCoolTurning on the ice cube maker Ice cube makerTurning off the ice cube maker Automatic defrost Moving the shelves Adjusting the interior fittingsAdjusting the door shelves Freezer basketsIce cube container Replacing the ice cube containerBefore cleaning Cleaning and careCleaning the interior and accessories Door seals After cleaningVentilation slits Aluminum framesChanging the light bulb Upper lightingSide lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter Certificate Number Filter Performance Data SheetWater Treatment Device State of California Department of Public HealthFailure to do so may void warranty Performance Data Sheet For Filter ModelUsing Replacement Cartridge To a capacity of 739.68 gallons 2800 litersFrequently asked questions Frequently asked questions Frequently asked questions The ice cube maker Problems with the ice makerwill not switch on The ice cube maker isThe ice cubes have The ice cubes aresmall an unpleasantFrequently asked questions Blubb, blubb The appliance is making noisesBrrrrr ClickAfter sales service MieleCarePage Installation instructions Disposal of packing materials Caring for the environmentDisposal of an old appliance Installation Installation siteFurniture/fixtures Installation nicheBase VentilationAppliances attached together using the Merging Kit Installation optionsCustom door panels Single columnInstallation with partition without using the Merging Kit Side panelsInstallation with partition using the Merging Kit from 5/8 16 mm to 6 5/16 160 mmDimensions Niche dimensions1. Power supply 2. Water connection Power supply and water connectionDoor dimensions open 525 mmInstalling the appliance Before you beginCheck the installation niche Before installationRemoteVision module installation Preparing the installation niche Mounting AccessoriesAnti-tip brackets Securing an alternative anti-tip device Sliding the appliance into the installation niche Unscrew the plinthAligning the appliance Align the custom door with a levelAttaching the appliance to the installation niche Open the appliance door Preparing the custom door Mark the distance X on the back-side of the custom door Attaching and aligning the custom door front Attaching the covers Attaching the toe-kick cover Attach the plinth to the applianceMounting the air separator Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel MasterCool control panel options for RemoteVision Page Page Alteration rights reserved F 1411 For the most updated manual see the Miele web siteM.-Nr