Miele F1411VI Custom door panels, Installation options, Single column, Side-by-side

Page 47
Custom door panels

Installation

Custom door panels

This appliance is compatible with all styles and designs of kitchen cabinetry.

The total weight of the decorative panel(s) must not exceed the following:

F 1411 Vi . . . . . . . . . . . . 123 lbs (56 kg)

Installation options

There are many different installation options. You are limited only by the design of the kitchen.

The door hinge cannot be exchanged.

Single column

The appliance can be installed at any preferred location in the kitchen.

However, be sure the door will open and close properly in the chosen location.

Side-by-side

This appliance can be installed "side-by-side" with another fridge/freezer using a "Merging Kit".

The "Merging Kit" is available from Miele.

Contact Miele or your dealer for specific information about which combinations will work with your appliance.

For instructions on how to attach the appliances and install the heating mat, please refer to the instructions included with the "Merging Kit", available from Miele.

Appliances attached together using the "Merging Kit"

If the appliances are installed directly next to each other (without a partition), they need to be attached together using the "Merging Kit".

47

Image 47
Contents en - US, CA Operating and Installation Instructions Freezer FContents Contents Electrical Safety IMPORTANT SAFETY INSTRUCTIONSInstallation Disposal of your old appliance SAVE THESE INSTRUCTIONSf Main switch to turn the appliance On/Off g Freezer baskets Guide to the freezera Door shelves height adjustable b Shelves height adjustable c Ice cube makerf Water filter change indicator Control panela Access button p activates the control panel e Sensor button for the temperature and door alarmTurning the appliance On/Off Before using for the first timeBefore use Custom settings SettingsUsing the settings Turning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Setting the temperature Setting the temperatureTemperature unit Fahrenheit/Celsius Freezing food Using the freezer efficientlyCooling drinks quickly DefrostingSuitable packing material Freezing tipsPacking tips Unsuitable packing material SuperCool SuperCoolTurning off the ice cube maker Ice cube makerTurning on the ice cube maker Automatic defrost Freezer baskets Adjusting the interior fittingsAdjusting the door shelves Moving the shelvesReplacing the ice cube container Ice cube containerCleaning the interior and accessories Cleaning and careBefore cleaning Aluminum frames After cleaningVentilation slits Door sealsUpper lighting Changing the light bulbSide lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter State of California Department of Public Health Filter Performance Data SheetWater Treatment Device Certificate NumberTo a capacity of 739.68 gallons 2800 liters Performance Data Sheet For Filter ModelUsing Replacement Cartridge Failure to do so may void warrantyFrequently asked questions Frequently asked questions Frequently asked questions The ice cube maker is Problems with the ice makerwill not switch on The ice cube makeran unpleasant The ice cubes aresmall The ice cubes haveFrequently asked questions Click The appliance is making noisesBrrrrr Blubb, blubbMieleCare After sales servicePage Installation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Installation site InstallationVentilation Installation nicheBase Furniture/fixturesSingle column Installation optionsCustom door panels Appliances attached together using the Merging Kitfrom 5/8 16 mm to 6 5/16 160 mm Side panelsInstallation with partition using the Merging Kit Installation with partition without using the Merging KitNiche dimensions Dimensions525 mm Power supply and water connectionDoor dimensions open 1. Power supply 2. Water connectionBefore you begin Installing the applianceBefore installation Check the installation nicheRemoteVision module installation Mounting Accessories Preparing the installation nicheAnti-tip brackets Securing an alternative anti-tip device Unscrew the plinth Sliding the appliance into the installation nicheAlign the custom door with a level Aligning the applianceAttaching the appliance to the installation niche Open the appliance door Preparing the custom door Mark the distance X on the back-side of the custom door Attaching and aligning the custom door front Attaching the covers Attach the plinth to the appliance Attaching the toe-kick coverMounting the air separator Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel MasterCool control panel options for RemoteVision Page Page M.-Nr F 1411 For the most updated manual see the Miele web siteAlteration rights reserved