Miele F1411VI Installing the appliance, Mark the distance X on the back-side of the custom door

Installing the appliance

^Mark the distance X on the back-side of the custom door.

^Also calculate and mark the center of the custom door Y.

^Remove the mounting frame from the appliance door and position it according to the markings on the custom door.

^Pre-drill the holes.

^Tightly screw on the bracket using the pre-drilled holes:

Attach the bracket to each attachment point with at least one screw.

^Attach the bracket at the top with at least 6 screws.

The bracket includes a variety of holes for the various design options of custom doors.

When performing work on the custom door, always observe the following:

–Always select the best load-bearing surface of the custom door as the location for screws.

–Always select a screw length that is shorter than the thickness of the door front.

62