Miele F1411VI installation instructions Installing the appliance, Anti-tip brackets

Page 55
Anti-tip brackets

Installing the appliance

Anti-tip brackets

The anti-tip brackets help keep the appliance safely secured to the installation niche to prevent tipping.

Two anti-tip brackets are recommended for each appliance or appliance combination (side-by-side).

The distance "D" between the anti-tip brackets b is the width of the appliance.

^Position the anti-tip brackets b on the left and right walls of the appliance niche.

^Mark the holes through the anti-tip brackets b on the floor of the installation niche.

^Set the brackets aside.

Assure that there are no electrical wires or plumbing in the area which the screws could penetrate - risk of injury and damage.

^ Drill pilot holes:

1/

8

" (3 mm) for 5 x 60 mm wood

 

 

 

 

 

screws

1/

16

" (2 mm) for 4 x 15 mm wood

 

screws.

^Tightly secure the anti-tip brackets in the niche.

Be certain that the screws penetrate through the flooring and into the wall plate a minimum of 3/4" (19 mm).

55

Image 55
Contents en - US, CA Operating and Installation Instructions Freezer FContents Contents Electrical Safety IMPORTANT SAFETY INSTRUCTIONSInstallation Disposal of your old appliance SAVE THESE INSTRUCTIONSf Main switch to turn the appliance On/Off g Freezer baskets Guide to the freezera Door shelves height adjustable b Shelves height adjustable c Ice cube makerf Water filter change indicator Control panela Access button p activates the control panel e Sensor button for the temperature and door alarmBefore use Before using for the first timeTurning the appliance On/Off Using the settings SettingsCustom settings Turning the button sound On/Off Turning off for longer periods of time Temperature alarm AlarmDoor alarm Setting the temperature Setting the temperatureTemperature unit Fahrenheit/Celsius Freezing food Using the freezer efficientlyCooling drinks quickly DefrostingPacking tips Unsuitable packing material Freezing tipsSuitable packing material SuperCool SuperCoolTurning on the ice cube maker Ice cube makerTurning off the ice cube maker Automatic defrost Freezer baskets Adjusting the interior fittingsAdjusting the door shelves Moving the shelvesReplacing the ice cube container Ice cube containerBefore cleaning Cleaning and careCleaning the interior and accessories Aluminum frames After cleaningVentilation slits Door sealsUpper lighting Changing the light bulbSide lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter State of California Department of Public Health Filter Performance Data SheetWater Treatment Device Certificate NumberTo a capacity of 739.68 gallons 2800 liters Performance Data Sheet For Filter ModelUsing Replacement Cartridge Failure to do so may void warrantyFrequently asked questions Frequently asked questions Frequently asked questions The ice cube maker is Problems with the ice makerwill not switch on The ice cube makeran unpleasant The ice cubes aresmall The ice cubes haveFrequently asked questions Click The appliance is making noisesBrrrrr Blubb, blubbMieleCare After sales servicePage Installation instructions Disposal of packing materials Caring for the environmentDisposal of an old appliance Installation site InstallationVentilation Installation nicheBase Furniture/fixturesSingle column Installation optionsCustom door panels Appliances attached together using the Merging Kitfrom 5/8 16 mm to 6 5/16 160 mm Side panelsInstallation with partition using the Merging Kit Installation with partition without using the Merging KitNiche dimensions Dimensions525 mm Power supply and water connectionDoor dimensions open 1. Power supply 2. Water connectionBefore you begin Installing the applianceBefore installation Check the installation nicheRemoteVision module installation Mounting Accessories Preparing the installation nicheAnti-tip brackets Securing an alternative anti-tip device Unscrew the plinth Sliding the appliance into the installation nicheAlign the custom door with a level Aligning the applianceAttaching the appliance to the installation niche Open the appliance door Preparing the custom door Mark the distance X on the back-side of the custom door Attaching and aligning the custom door front Attaching the covers Attach the plinth to the appliance Attaching the toe-kick coverMounting the air separator Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel MasterCool control panel options for RemoteVision Page Page Alteration rights reserved F 1411 For the most updated manual see the Miele web siteM.-Nr