Miele KM 5627, KM 5621, KM 5624 installation instructions Important Installation Safety Instructions

Page 22

IMPORTANT INSTALLATION SAFETY INSTRUCTIONS

Note to the installer:

Please leave this instruction book with the consumer for the local electrical inspector’s use.

The minimum distances given in these Installation Instructions must be observed in order to ensure safe operation. Failure to do so increases the risk of fire.

The cabinetry and venting hood should be installed first to prevent damage to the cooktop.

￿This appliance has not been designed for maritime (e.g. ships) use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for installation in these applications. Please contact the Miele Technical Service Department with specific requirements.

￿You must ensure the power cable for the appliance will not come into contact with the floor panel after installation, nor be subject to any mechanical strain.

￿The countertop must be bonded with heat resistant (212°F/100°C) adhesive to prevent distortion or dissolving.

Any back splashes should also be heat-resistant.

￿The cooktop must not be installed over a dishwasher, washer, dryer, refrigerator or freezer. Heat radiated by the cooktop may damage them.

￿The cooktop must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the cooktop provides a sufficient seal for the countertop. See "Sealing".

￿The safety distances specified in these instructions must be followed carefully.

￿To eliminate the risk of burns or fire by reaching over heated surfaces cabinet storage space above the appliance should be avoided. If cabinet storage is necessary, the risk can be reduced by installing a venting hood to project horizontally a minimum of 5" (127 mm) beyond the bottom of the cabinets.

Keep this instruction book in a safe place for reference and pass it on to any future user.

22

Image 22
Contents Operating and Installation Instructions Ceramic Cooktop Contents Correct usage ChildrenTechnical safety Safety Do not Touch the CookingImportant Safety Instructions Review Them Periodically Burner data Description of the cooktopBurner Diameter Output in Watts at Inch 208/240 Burner Diameter Output in Watts at Inch 208/240V Burner Diameter Output in Watts at Inch 208 240 Clean the cooktop Before using for the first timeHeat the cooktop One-zone burner How the burners operateTwo-zone burner Turning on the second heating ring OperationTurning on Turning offResidual heat indicator Selecting cookware Energy saving tipsOverheat protection Cleaning and Care Ceramic surfacesFrequently asked questions Technical Service Page Installation Instructions Important Installation Safety Instructions Safety distances above the appliance Safety distance from dividerNot allowed Safety distances to the sides of the applianceRecommended Not recommended Safety distance from the wall covering InstallationCooktops flush with the countertop Frame/Facet cooktops Frame/Facet Cooktops Sealing Tiled surfacesInstallation dimensions Installation dimensions Installation dimensions Facet cooktops Wood or solid surface countertopGranite countertop Insert the cooktop Electrical connection Disposal of packing materials Help protect our environmentDisposal of an old appliance Page Alteration rights reserved Nr 844 520

KM 5621, KM 5624, KM 5627 specifications

The Miele KM 5627, KM 5624, and KM 5621 are part of Miele's premium range of induction cooktops, designed to deliver exceptional performance, precision, and elegance in the kitchen. Each model combines top-tier technology with user-friendly features to cater to the needs of both professional chefs and home cooks alike.

One of the standout features across these models is Miele's innovative induction technology. This allows for rapid heating and precise temperature control, ensuring that food is cooked evenly and efficiently. Induction cooking is not only quicker than traditional gas or electric methods but also safer, as the cooktop surface remains relatively cool, minimizing the risk of burns.

The KM 5627 model boasts an expansive cooking area with a generous number of individual cooking zones. It features Miele's exclusive TwinBooster function, which allows for a significant increase in power on select cooking zones, enabling boiling water or heating pans in a fraction of the time compared to standard induction cooktops. Additionally, it comes equipped with a timer and automatic shut-off function, which adds safety and convenience for busy cooks.

Moving to the KM 5624, it delivers similar induction performance but with a slightly different configuration tailored for smaller kitchens or more compact cooking spaces. It also includes Miele's ComfortProfit feature, which efficiently adjusts the power levels as needed, making it perfect for both simmering and searing. The model's intuitive touch controls provide a seamless cooking experience, allowing users to effortlessly adjust settings with a simple swipe.

The KM 5621, while more compact, does not compromise on features. It includes Miele's innovative PowerFlex technology that intelligently combines several cooking zones for larger pots and pans, making it versatile for various cooking needs. This model also emphasizes safety and ease of use, with residual heat indicators and lock functions to prevent accidental activation.

All three models are designed with durability and style in mind. The sleek black surface not only looks aesthetically appealing but is also easy to clean, making kitchen maintenance a breeze. Each cooktop is built using high-quality materials ensuring a long lifespan, reflecting Miele's commitment to excellence.

In summary, the Miele KM 5627, KM 5624, and KM 5621 are exemplary induction cooktops that incorporate cutting-edge technology and user-centric features. Whether for everyday cooking or gourmet meal preparations, these models offer a superior cooking experience that exemplifies Miele’s dedication to quality and innovation in the kitchen.