Miele KM 5621, KM 5627, KM 5624 Facet cooktops, Wood or solid surface countertop

The exact positions of the spring clamps and the support bars (for beveled cooktops only) are shown in the "Installation dimensions" of each unit.

Facet cooktops:

A special sealing strip ensures the slip-proof seating of the cooktop in the cutout. The gap between the frame and the countertop will narrow after a little time has passed.

￿Create the countertop cutout as shown in the "Installation dimensions". Observe the safety distances (see "Installation Safety Instructions").

Wood or solid surface countertop

￿Seal the cut surfaces with a suitable sealant to avoid swelling caused by moisture.

The materials used must be heat resistant.

Ensure that these materials do not get on the top surface of the countertop panels.

￿Position the spring clips and the securing strips (supplied with the appliance; only for facet cooktops) on the top edge of the cut-out

￿Attach the spring clips ￿ and the securing strips ￿ with the

3.5 x 25 mm wood screws (supplied).