Technical safety

IMPORTANT SAFETY INSTRUCTIONS

Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.

Be sure your appliance is properly installed and grounded by a qualified technician.

Before installing the cooktop, check for externally visible damage. Do not operate a damaged appliance.

To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.

Before installation, make sure that the voltage and frequency listed on the rating label correspond with the household electrical supply. To prevent injury and appliance damage, these data must match. Consult a qualified electrician if in doubt.

Do not use an extension cord to connect this appliance to the electrical supply. Extension cords do not ensure the required safety of the appliance.

Install the appliance so that the power cord does not come into contact with any portion of the cooktop which may become hot during use.

Do not use the appliance until it has been properly installed in the countertop.

Before servicing, disconnect the appliance from the main power supply.

Do not operate any appliance with a damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele’s Technical Service Department.

Under no circumstances open the outer casing of the appliance.

While the appliance is under warranty repairs should only be performed by an authorized service technician. Otherwise the warranty is void.

In the event of any damage to the appliance, it must be turned off immediately and disconnected from the main power supply. Contact Miele’s Technical Service Department.

Do not use the appliance until it has been repaired. Ensure power is not supplied to the appliance until repair work is completed.

Defective components should be replaced by Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.

Do not cook on a broken cooktop. Any breakages or cracks in the ceramic surface of the appliance are defects and must be treated as such. If the cooktop should break, cleaning solutions and spills may penetrate the broken cooktop and create a risk of electric shock. Do not use the appliance until it has been repaired.

KM 5621, KM 5624, KM 5627 specifications

The Miele KM 5627, KM 5624, and KM 5621 are part of Miele's premium range of induction cooktops, designed to deliver exceptional performance, precision, and elegance in the kitchen. Each model combines top-tier technology with user-friendly features to cater to the needs of both professional chefs and home cooks alike.

One of the standout features across these models is Miele's innovative induction technology. This allows for rapid heating and precise temperature control, ensuring that food is cooked evenly and efficiently. Induction cooking is not only quicker than traditional gas or electric methods but also safer, as the cooktop surface remains relatively cool, minimizing the risk of burns.

The KM 5627 model boasts an expansive cooking area with a generous number of individual cooking zones. It features Miele's exclusive TwinBooster function, which allows for a significant increase in power on select cooking zones, enabling boiling water or heating pans in a fraction of the time compared to standard induction cooktops. Additionally, it comes equipped with a timer and automatic shut-off function, which adds safety and convenience for busy cooks.

Moving to the KM 5624, it delivers similar induction performance but with a slightly different configuration tailored for smaller kitchens or more compact cooking spaces. It also includes Miele's ComfortProfit feature, which efficiently adjusts the power levels as needed, making it perfect for both simmering and searing. The model's intuitive touch controls provide a seamless cooking experience, allowing users to effortlessly adjust settings with a simple swipe.

The KM 5621, while more compact, does not compromise on features. It includes Miele's innovative PowerFlex technology that intelligently combines several cooking zones for larger pots and pans, making it versatile for various cooking needs. This model also emphasizes safety and ease of use, with residual heat indicators and lock functions to prevent accidental activation.

All three models are designed with durability and style in mind. The sleek black surface not only looks aesthetically appealing but is also easy to clean, making kitchen maintenance a breeze. Each cooktop is built using high-quality materials ensuring a long lifespan, reflecting Miele's commitment to excellence.

In summary, the Miele KM 5627, KM 5624, and KM 5621 are exemplary induction cooktops that incorporate cutting-edge technology and user-centric features. Whether for everyday cooking or gourmet meal preparations, these models offer a superior cooking experience that exemplifies Miele’s dedication to quality and innovation in the kitchen.