Settings
Heating-up phase
The
Rapid
(Factory default)
All the heating elements are switched on together in order to heat the oven up as quickly as possible to the required temperature.
and "Rapid
Normal
Only the heating elements for the cooking function selected are switched on.
and
Start
Automatic
(Factory default setting)
A programme will start automatically approx. 20 seconds after making your last entry without having to select Start.
Manual
If "Manual" has been selected, "Start" will appear at the beginning of each programme and must be confirmed before the programme will start.
Recommended temperatures
If you frequently change a recommended temperature it may be a good idea to change it permanently.
The recommended temperatures is displayed next to the function.
When you select a function the recommended temperature is highlighted.
The setting range available will also appear.
Display
Contrast
The contrast is represented by a bar with seven segments.
Factory default: Four illuminated segments.
To change the contrast touch the sensor next to "Lower" or "Higher".
Brightness
The brightness is represented by a bar with seven segments.
Factory default: Six illuminated segments.
To change the brightness touch the sensor next to "Darker" or "Lighter".
49