Flue Connections, Stands | Vulcan-Hart ML-135310-936RX manual

Casters are only supplied on a griddle stand. If the griddle is moved for any reason the griddle should be re-leveled (see LEVELING in this manual).

FLUE CONNECTIONS

Do not obstruct the flow of flue gases from the flue, located at the rear of the griddle. It is recommended that flue gases be ventilated to the outside of the building through a ventilation system installed by qualified personnel.

From the termination of the flue to the filters of the hood venting system, a minimum clearance of 18” must be maintained.

Information on the construction and installation of ventilating hoods may be obtained from the standard for “Vapor Removal from Cooking Equipment”, NFPA No. 96 (latest edition), available from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.

STANDS

The griddle has an optional 25” high by 30” deep by 24”, 36”, 48”, 60” or 72” wide stainless steel stand with casters. The two front casters lock. The stand includes a top shelf with marine edges style lip and a lower shelf.

GAS CONNECTIONS

Gas supply connections and any pipe joint compound must be resistant to the action of propane gases.

Use a ¾” NPT gas supply line for the griddle inlet, located at the rear of the griddle. All of flexible and semi-rigid gas supply lines must comply with the applicable ANSI standard. To ensure maximum operating efficiency this appliance must be connected with a gas supply line of solid pipe or a commercial type Flexible Connector with the net inside diameter (I.D.) as large as or larger than the gas pipe inlet on this appliance. Codes require that a gas shutoff valve must be installed in the gas line upstream of the griddle.

Prior to lighting, check all joints in the gas supply line for leaks. Use soap and water solution. Do not use an open flame.

After checking for leaks all lines receiving gas should be fully purged to remove air.

TESTING THE GAS SUPPLY SYSTEM

When the gas supply pressure exceeds ½ psig (3.45 kPa), the griddle and its individual shutoff valve must be disconnected from the gas supply piping system.

When the gas supply pressure is ½ psig (3.45 kPa) or less, the griddle should be isolated from the gas supply system by closing its individual manual shutoff valve.

GAS PRESSURE REGULATOR INSTALLATION

Gas regulator pressure is preset at 5” Water Column (W.C.) for natural gas, and 10” W.C. for propane gas. No further adjustment should be required.

Install the regulator as close to the griddle on the gas supply line as possible. Make sure that the arrow on the underside of the regulator is oriented in the direction of gas flow to

- 5 -

ML-135311-948RX, ML-135313-972RX, ML-135312-960RX, ML-135309-924RX, ML-135310-936RX specifications

The Vulcan-Hart ML series consists of high-performance commercial cooking equipment designed to meet the diverse needs of foodservice establishments. Specifically, the ML-135310-936RX, ML-135309-924RX, ML-135312-960RX, ML-135313-972RX, and ML-135311-948RX models showcase advanced features and technologies that enhance cooking efficiency, safety, and ease of use.

Each model in the ML series is engineered for durability and high output, making them ideal for busy kitchens. The units are constructed with heavy-duty stainless steel, ensuring longevity and resistance to wear and tear. The sleek design is not only practical but also contributes to a professional kitchen aesthetic.

A standout feature of the ML series is their heavy-duty burners that provide superior heat distribution, allowing for consistent cooking results. The powerful burners are designed to optimize energy efficiency while maintaining high performance, essential for chefs who demand reliable heating for various cooking applications.

The ML-135310-936RX model, for example, offers an innovative control system that allows for precise temperature adjustments, enabling chefs to tailor the cooking process to their specific needs. This model also includes a user-friendly interface with easily accessible controls, reducing the learning curve for kitchen staff.

Another notable model, the ML-135312-960RX, incorporates advanced safety features, such as automatic shut-off mechanisms and flame failure protection. These technologies enhance safety in a bustling kitchen environment, giving operators peace of mind while focusing on food preparation.

Moreover, the models in the Vulcan-Hart ML series are designed with maintenance in mind. Their components are easily accessible, simplifying cleaning and servicing, which is crucial for maintaining optimal performance over time. Routine maintenance is further facilitated by the presence of removable parts, allowing for quick and efficient upkeep.

In addition to performance and safety features, the ML series stands out for its versatility. Chefs can utilize these units for grilling, sautéing, or frying, making them suitable for a broad range of culinary applications. This adaptability is particularly beneficial in establishments such as restaurants and catering services that provide diverse menus.

Overall, the Vulcan-Hart ML-135310-936RX, ML-135309-924RX, ML-135312-960RX, ML-135313-972RX, and ML-135311-948RX models deliver reliability, safety, and versatility, addressing the demands of modern kitchens. With their advanced cooking technologies, durable construction, and user-centric design, these units are an excellent choice for any foodservice operation looking to enhance productivity and service quality.