Regency P42-LP3, P42-NG3 installation manual Full Screen Front, Full Screen Door Frame Installation

INSTALLATION

FULL SCREEN FRONT

1)Before beginning the installation, remove the Glass Door from the unit. Refer to the manual for instructions.

2)Remove the Screen Doors from the Full Screen Door Frame by fully opening the doors and lifting up off of the hinges. See important note in step 9.

3)Full Screen Door Frame Installation

a)Before attaching the Full Screen Door Frame to the unit, loosen the left and right side #8 Self Tapping Philips Screws located on the inside top of the outer frame of the appliance. Also remove the center screw.

b)Slide the cut-outs in the Top and Bottom Flange of the Full Screen Door Frame under the screw heads which were loosened in step 3a. Once the Frame is in place, tighten the screws to secure. Also re- secure the top center screw through the oblong hole.

Inside Top

of Outer

Frame

Screw

Screw

Screw

Full Screen Door Frame

Cut-Out

Oblong

Hole

Cut-Out

Top

Flange

Bottom

Flange

Backside of Full

Screen Door

Frame Shown

Cut-Outs

Regency P42-3 Zero Clearance Direct Vent Gas Fireplace 27