luestions? BeforeYou Cali for Service... co 0ood)
PROBLEM
CLOCK AND TIMER
DO NOT WORK
THE DISPLAY GOES BLANK OR INDIC__TOR
LIGHTS COME ON WHEN THE RANGE IS NOT tN USE
SELF CLEAN DOOR LATCH
LIGHT FLASHES
OVEN LIGHT DOES NOT COME ON
SURFACE LIGHT DOES NOT WORK OVEN WILL NOT WORK
OVEN TEMPERATURE
TOO HOT OR TOO COLD
FOOD DOES NOT ROAST OR BAKE PROPERLY
POSSIBLE CAUSE
°Range electrical plug must be securely seated in a live power outlet. Check for blown fuse or tripped circuit breaker,
°Check for power outage.
- Review the Oven Control, Clock and Timer section of this guide.
•If the time display flashes "F and a number", you have a function error code.
Ifa fimction error code appears during the
Put the oven back into operation.
•Disconnect all power to the range for 5 minutes arid then reconnect power. If the failure code repeats, then call for service.
°Disconnect power to the range ar the time box or circuit breaker fbr at least
I0 seconds. Turn power bade on_ If the indicator lights are st!ll on_ _ for service.
"The OVEN SET knob is set at CLEAN before the door latch handle is moved to the right.
•Bulb may be loose or burned out.
•Electrical plug must be plugged into a live power outlet.
° Fluorescent bulb is loose or defective. Adjust or replacer - Switch operating light is broken° Call for service.
•Plug on the range is not completely inserted in the electrical outlet,
° The circuit breaker in your house has been tripped, or a fuse has been blown. "Door left in lock position after
° Oven controls not properly set.
•The oven thermostat needs adjusrmenr. See the Adjust the Oven
Thermostat--Do It Yaurselfsection.
Oven controls not properly set. See the Baking or Roasting section. Shelf position is nor correct.
Incorrect cookware or coolcware of improper size is being used.
Oven thermostat needs adjustment_. See the Adjust the Oven
•Clock not set correctly°
•Aluminum foil used improperly in the oven°
•Oven bottom not securely seated in position.
44