Sears BH9431PW Wireless speakers connection, manually, LED indicator of wireless receiver, Yellow

14Getting Started

1 GettingStarted

Wireless speakers connection

1.Insert the Wireless TX till the marked line into the WIRELESS connector on the rear of the unit.

Line

2.Connect the power cord of the wireless receiver to the outlet.

3.When you turn on the player, the wireless speakers connection will be completed automatically.

-- When the connection is completed, you can see the icon () on the display window.

,,Note

yy Do not insert other than the Wireless TX dedicated for this unit into the WIRELESS connector. This unit might be damaged or it may not be removed easily.

yy If there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (wireless receiver and main unit) away from there.

yy It takes a few seconds (and may take longer) for the Wireless TX and the wireless receiver to communicate with each other.

yy The available range is 20 m for wireless connection in an open place.

Wireless speakers connection, manually

You can set up wireless speakers connection manually, when your connection is not completed. Refer to the “Connect wireless speakers” on page 31.

LED indicator of wireless receiver

LED Color	Operation
Yellow	The connection is not completed.
(Blink)
Yellow	The connection is completed.
Red	The connection is in standby
	mode or failed.
Off	The AC power cord is unplugged.
(No display)