Sears BH9430PW, BH9431PW owner manual Initial Setup

	System Setting 25
Initial Setup	5. Use W/S/A/Dto select the IP mode
	between [Dynamic] and [Static].
	Normally, select [Dynamic] to allocate an IP
When you turn on the unit for the first time, the	address automatically.
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
1. Press 1(POWER).
The initial setup wizard appears on the screen.
2. Use W/S/A/Dto select a display language
and press ENTER (b).	6. Select [Next] and press ENTER (b) to apply
	network settings.

3. Read and prepare the preparations for the
network settings and then press ENTER (b)	Network connection status is displayed on the
while [Start] is highlighted.
	screen.
	For details on network settings, refer to
	“Connecting to your Home Network” on page
	20.
7. Select [Next] and press ENTER (b).
If wired network is connected, the network
connection setting will automatically be
finished.
4. All available networks are displayed on the
screen. Use W/Sto select [Wired Network]
or desired SSID of wireless network and press	Read and prepare the preparations for the
ENTER (b).	wireless speaker setting.
8.	Select [Next] and press ENTER (b).

3

System Setting

If you have security on your access point, you need to input the security code as necessary.