Connecting 23
,,Note
yy WEP security mode generally have 4 keys available on an access point setting. If your access point or wireless router use WEP security, enter the security code of the key “No.1” to connect on your home network.
yy An Access Point is a device that allows you to connect to your home network wirelessly.
4.Use W/S/A/Dto select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
,,Note
If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/ A/Dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.
5.Select [Next] and press ENTER (b) to apply network settings.
Network connection status is displayed on the screen.
6.Select [OK] and press ENTER (b) to complete the network connection.
Advanced Setting
If you want to set the network settings manually, use W/Sto select [Advanced Setting] on the [Network Setting] menu and press ENTER (b).
1.Use W/Sto select [Wireless] and press ENTER (b).
[AP List] - Scans all available access points or wireless routers within range and display them as a list.
[Network name (SSID)] – Your access point may not be broadcasting its network name (SSID). Check your access point settings through your computer and either set your access point to broadcast SSID, or manually enter the network name in [Network name(SSID)].
[PBC] – If your access point or wireless router that supports the PBC (Push Button Configuration) method, select this option and press the Push Button on your access point within 120 counts. You do not need to know the network name (SSID) and security code of your access point.
[PIN] – If your access point supports the PIN Code configuration method based on WPS(Wi- Fi Protected Setup), select this option and note the code number on the screen. And then, enter the PIN number on a setting menu of your access point to connect. Refer to the documentation for your network device.
2.Follow the instructions of each connection method on the screen.
,,Note
To use PBC and PIN network connection, security mode of your access point must be set to OPEN or AES.
2
Connecting