26System Setting
9.Press ENTER (b) to verify the test tone signals of the speakers.
After verifying the test tone signals, press ENTER (b) while [Stop] is highlighted. Select [Next] and press ENTER (b).
10. You can listen to TV sound through this unit’s speaker automatically when TV is turned on. TV
3and this unit should be connected with optical cable.
System Setting
Press Wto move and press A/Dto select [On] or [Off ]. Select [Next] and press ENTER (b).
11.Check all the settings that you have set in the previous steps.
Press ENTER (b) while [Finish] is highlighted to finish the initial setup settings. If there is any settings to be changed, use W/S/A/Dto select 1and press ENTER (b).
Settings
Adjust the setup settings
You can change the settings of the player in the [Settings] menu.
1. Press HOME (
).
2.Use A/Dto select the [Settings] and press ENTER (b). The [Settings] menu appears.
3.Use W/Sto select the first setup option, and press Dto move to the second level.
4.Use W/Sto select a second setup option, and press ENTER (b) to move to the third level.
5.Use W/Sto select a desired setting, and press ENTER (b) to confirm your selection.