C24GA SERIES GAS CONVECTION STEAMERS
TROUBLESHOOTING
SYMPTOMS | POSSIBLE CAUSES | REMEDY |
|
|
|
Unit not steaming | Gas supply is off | Turn on gas supply. |
| Power cord is unplugged | Plug in power cord. |
| Power switch is off | Press power switch on. |
| Water supply is off | Turn on water supply. |
| Burner control goes into 100% | Shut off the power, wait 5 |
| lockout | minutes, then turn power back on |
|
| to restart ignition. |
|
| If symptom persists, contact your |
|
| Authorized |
Door leaks | Damaged door gasket | Check door gasket for damage. If |
|
| adjustment is needed, contact |
|
| your Authorized |
|
| Servicer. |
| Plugged drain or screen | Clear compartment cavity screen. |
|
| If symptom persists, contact your |
|
| Authorized |
Water accumulates in | Drain clogged | Unclog drain. |
compartment | Not leveled properly | Level per instructions in this |
| ||
|
| manual. |
Water not being | Water supply valve is off | Turn valve on. |
supplied to generator | Water pressure low | Check water supply pressure. |
| ||
| Water filter is plugged | Refer to water filter manual. If |
|
| symptom persists, contact your |
|
| Authorized |
Steam is exiting from | Generator pressure is too high | Contact your Authorized Vulcan- |
under unit |
| Hart Servicer. |
|
|
|
SERVICE AND PARTS INFORMATION
To obtain service and parts information concerning this model, contact the
When calling for service, the following information must be available: model number, serial number, manufacture date (MD) and voltage.
— 20 — | PRINTED IN U.S.A. |