Microwaving and Other Advantium Features, Fire Risk

Microwaving and Other Advantium Features

To use all sensor programs

To use the sensor features:

1.Press the MICROWAVE pad.

2.Turn the dial to select COOK BY FOOD (located under COOK), REHEAT, or SIMMER.

3.For COOK BY FOOD and REHEAT, select a food and press the dial to enter. For SIMMER, set the time to simmer after the soup, sauce or stew has come to a boil.

4.Press the dial or press the START/ PAUSE pad to start cooking.

Do not open the oven door until time is counting down on the display. If you open the door while sensor cooking, “Sensor Error

-Close door and press START” will appear. Close the door immediately and press the START/PAUSE pad to begin again.

WARNING:

Fire Risk

Do not use a sensor feature twice in succession on the same food portion—it may result in severely overcooked or burnt food. If the food is not done enough at the end of the sensor cook time, use COOK BY TIME in the microwave selector to cook for more time.

nIf you have been cooking and the oven is hot, it may indicate that it is too hot for sensor cooking. In that case, the oven will automatically change to time cooking and may prompt for weights or amounts of food.

nTo shorten or lengthen the

cook time, wait until the time countdown shows in the display. Then turn the dial to add or subtract time.

Advantium Oven

Notes about the Reheat program:

Reheated foods may have wide variations in temperature. Some areas may be extremely hot.

It is best to use COOK BY TIME and not REHEAT for these foods:

nBread products

nFood that must be reheated uncovered

nFoods that need to be stirred or turned

nFoods calling for a dry look or crisp surface after reheating

How to adjust the oven’s automatic COOK BY FOOD and REHEAT settings for a shorter or longer cook time (not available for all food types):

To reduce the automatic cooking times: Right after the oven starts, turn the dial counterclockwise until a minus (“-“) sign or a double minus (“--“) sign appears and press the dial to enter. A minus (“-“) sign is a 10% reduction of cooking time and a double minus (“--“) sign is a 20% reduction of cooking time.

To increase the automatic cooking times: Right after the oven starts, turn the dial clockwise until a plus (“+“) sign or a double plus (“++“) sign appears and press the dial to enter. A plus (“+“) sign is a 10% increase of cooking time and a double plus (“++“) sign is a 20% increase of cooking time.

Cooking Complete

Repeat last

To remind you that you have food	once a minute until you either open the oven
in the oven, the oven will display the cooking	door or press the CLEAR/OFF pad.
mode and COOKING COMPLETE and beep
Use this time saving feature for cooking	NOTE: The last program used is stored for two
repetitive items like cookies or appetizers. This	hours.
feature will repeat the last cooking cycle used,
including time, temperature, power levels, and
turntable settings
1. Press COOKING OPTIONS and select	3. Press the START/PAUSE pad or the selector
REPEAT LAST.	dial to start cooking.
2. The last cooking cycle will be displayed.