GE JGB910, JGB920 Installation of the range, Read these instructions completely and carefully

Page 40

Safety Instructions

Installation of the range.

Read these instructions completely and carefully.

BEFORE YOU BEGIN

Installation of this range must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1, latest edition. In Canada, installation must conform with the current Natural Gas Installation Code, CAN/CGA-B149.1 or the current Propane Installation Code, CAN/CGA- B149.2, and with local codes where applicable. This range has been design-certified by the American Gas Association according to ANSI Z21.1, latest edition and Canadian Gas Association according to CAN/CGA-1.1 latest edition.

Operating Instructions

As with any appliance using gas and generating heat, there are certain safety precautions you should follow. You will find these precautions in the Important Safety Information section in the front of this manual. Read them carefully.

IMPORTANT: Save these instructions for the local electrical inspector’s use.

NOTE TO INSTALLER: Leave these instructions with the appliance after installation is completed.

NOTE TO CONSUMER: Keep this Owner’s Manual and Installation Instructions for future use.

NOTE: This appliance must be properly grounded.

Tips Installation Instructions

FOR YOUR SAFETY

Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

If you smell gas:

Open windows.

Don’t touch electrical switches.

Extinguish any open flame.

Immediately call your gas supplier.

TOOLS YOU WILL NEED

Troubleshooting

Customer Service

Phillips and flat-blade screwdrivers

Pencil and ruler

Two pipe wrenches (one for backup)

138 open-end or adjustable wrench

Nut drivers or wrenches: 3/16 and 1/4

ADDITIONAL MATERIALS YOU MAY NEED:

Gas line shut-off valve

Pipe joint sealant or UL-approved pipe thread tape with Teflon* that resists action of natural and LP gases

Flexible metal appliance connector (1/2 I.D.) A 5-foot length is recommended for ease of installation but other lengths are acceptable. Never use an old connector when installing a new range.

Flare union adapter for connection to gas supply line (3/4 or 1/2 NPT x 1/2 I.D.)

Flare union adapter for connection to pressure regulator on range (1/2 NPT x 1/2 I.D.)

40

*Teflon: Registered trademark of DuPont

 

Image 40
Contents GE Appliances 183D5580P072 49-8995-306-00 JR 350A4502P216Customer Service ANTI-TIP DeviceGE & You, a Service Partnership Staple sales slip or cancelled check hereWrite the model and serial numbers here Two easy ways to register your applianceImportant Safety Notice All ranges can tip and injury could resultSafety Instructions Surface Burners Operating Instructions Installation Instructions Glass Cooktop Surface on some modelsService Tips Installation Instructions Operating InstructionsUsing the gas surface burners SafetyInstructions Operating InstructionsStove Top Grills Top-of-Range CookwareWok This Way Using the electric glass top warming zone. On some models Instructions Operating Instructions InstallationAbout the glass surface on some models… Food TypeUsing the oven controls Oven Control, Clock and Timer Features and SettingsSpecial features of your oven control Fahrenheit or Celsius Temperature SelectionInstallation Instructions Hour Shut-OffTips Control Lockout on some modelsCook and Hold Start padSafety Instructions Troubleshooting Tips Customer ServiceUsing the oven Power OutageBefore you begin… Oven VentHow to Set the Oven for Baking or Roasting Preheating and Pan PlacementAluminum Foil Oven MoistureBroiling Guide How to Set the Oven for BroilingHI Broil Using the clock and timer To Set the TimerTo Reset the Timer To Cancel the TimerUsing the timed baking and roasting features How to Set an Immediate Start and Automatic StopHow to Set a Delayed Start and Automatic Stop CustomerUsing the probe. On some models How to Set the Oven For Roasting When Using the ProbeUsing the convection oven Convection BakeConvection Roast Automatic Convection ConversionHow to Set the Oven for Convection Baking or Roasting Paper and PlasticMetal and Glass Multi-Shelf BakingInstallation Instructions Operating Instructions Safety Touch the Convection Roast padConvection Roasting Guide MeatsTroubleshooting Tips Installation Using the timed features for convection bakingTouch the Convection Bake pad Adjust the oven thermostat-Do it yourself Instructions Troubleshooting Tips Customer ServiceTo Adjust the Thermostat Type of margarine will affect baking performanceUsing the electric warming drawer When Using the Warming DrawerControl Knob PanTo Crisp Stale Items Temperature Selection ChartTo Warm Serving Bowls and Plates Before a Clean Cycle Using the self-cleaning ovenHow to Set the Oven for Cleaning After a Clean Cycle How to Delay the Start of CleaningCare and cleaning of the range Sealed Burner Assemblies-porcelain cooktop modelsBurner Heads Burner CapsInstallation Instructions Troubleshooting Tips Customer ServiceSealed Burner Assemblies-glass cooktop models Tips Installation Burner GratesCooktop Surface on porcelain cooktop models Stainless Steel Surfaces on some modelsCleaning the glass cooktop surface. On some models Normal CleaningSafety Instructions For Heavy, Burned-On Soil…To clean the inside of the door To clean the outside of the doorLift-Off Oven Door Oven BottomWarming Drawer Rack Warming Drawer PanRemovable Warming Drawer on some models To replace the warming drawerInstructions Safety Instructions Oven Air VentsUpper Control Panel Lower Control Panel and KnobsOven Light Replacement Instructions Installation InstructionsOven Shelves Fluorescent Top LightRead these instructions completely and carefully Installation of the rangeOperating Instructions Must Never be Less than 24 Inches 36 ⁄ ± 1⁄4 28 1⁄4 to46 3⁄8 Troubleshooting Tips LocationProvide Adequate Gas Supply Operating InstructionsConnect the Range to Gas Gas Pipe and Electrical Outlet Locations Troubleshooting Tips Installation Customer Service Flexible Connector HookupInstaller Inform Gas Flow into RangeElectrical Connections Electrical Requirements Extension Cord CautionsGrounding IMPORTANT-Please read carefully Preferred MethodInstructions Operating Instructions Safety Electric DisconnectSeal the Openings Check Ignition of Surface BurnersQuality of Flames Check Ignition of Oven BurnerYellow flames Soft blue flames-Normal for natural gasLeveling the Range To remove the oven bottomWhen All Hookups Are Completed Installing the Anti-Tip DeviceTroubleshooting Tips Customer Operating Instructions Safety Instructions Before You Call For Service…Problem Possible Causes What To Do Control signals after Oven temperature tooClock and timer Florescent top lightAfter a clean cycle Oven not clean after a Clean cycleIs on when you want Crackling orPower outage Display goes blankDisplay flashes Unable to getOperating Instructions Safety Instructions We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Safety Instructions Operating Instructions Safety Instructions Safety Instructions What GE Will Not Cover GE Will Replace, At No Charge To YouWarrantor General Electric Company. Louisville, KY Camco Will Replace, At No Charge To You What Camco Will Not CoverService Telephone Numbers GE Answer Center
Related manuals
Manual 60 pages 25.15 Kb Manual 64 pages 25.85 Kb

JGB910, JGB920 specifications

The GE JGB920 is a top-of-the-line gas range that embodies advanced features and modern cooking technologies, making it a favorite among culinary enthusiasts and home cooks alike. One of its standout characteristics is the powerful stainless steel construction, which not only delivers a sleek and professional look but also ensures durability and easy maintenance.

One of the primary features of the GE JGB920 is its convection oven, which uses a fan to circulate hot air, providing even cooking results for all dishes. This technology is especially beneficial for baking, as it aids in creating consistent browning and prevents hot spots. Additionally, the oven boasts a generous capacity, allowing users to prepare multiple dishes simultaneously or accommodate larger roasts.

The JGB920 also features a variety of cooking modes, including bake, broil, and even specialized settings like a self-cleaning function. This feature automates the cleaning process, using high temperatures to eliminate food residues, thus simplifying post-cooking cleanup.

The range is equipped with a precise temperature control system, allowing for accurate adjustments for various cooking methods. The integrated electronic ignition ensures a reliable start-up, while the gas burners provide responsive heat adjustment, enabling users to achieve the desired cooking temperatures efficiently.

Another significant aspect of the GE JGB920 is its Smart technology capability. By connecting to a home network, users can control the range remotely via a smartphone app. This feature allows for preheating the oven or adjusting cooking settings from the comfort of another room, adding convenience to the cooking process.

The cooktop itself is designed with versatility in mind. It offers multiple burner sizes, including a powerful high-heat burner for boiling and a simmer burner for delicate sauces. This flexibility meets various cooking demands, from searing to simmering, enhancing the range's overall functionality.

Safety is also a priority in the design of the GE JGB920. The range includes a variety of safety features, such as a gas safety valve and a child lock, ensuring peace of mind for families.

In summary, the GE JGB920 gas range successfully combines innovative cooking technologies with user-friendly features and a stylish design. Its convection oven, smart technology integration, and versatile cooktop options make it an excellent choice for any kitchen, elevating the cooking experience to new heights.