Pelco FR106011 manual Rear Panel

REAR PANEL

All connections to the FT106011 transmitter and FR106011 receiver are made to the rear panel of the modules (refer to Figure 3).

Figure 3. Rear Panel of FT106011 Transmitter and FR106011 Receiver

RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of rack- mounted module

STAND-ALONE POWER CONNECTOR, 2-pin connector for power connection of stand-alone module; removable mating connector with screw terminals (not shown)

FIBER OPTIC CONNECTOR, ST or FC (dependent on FT106011/FR106011 model)

CONTACT CLOSURE CONNECTOR, 6-pin connector; removable mating connector with tension clamps (not shown)

DATA CONNECTOR, 8-pin connector; removable mating connector with tension clamps (not shown)

AUDIO CONNECTOR, 12-pin connector; removable mating connector with tension clamps (not shown)

BNC CONNECTOR, 75-ohm analog video input (FT106011)/output (FR106011)

For additional information about rear-panel connections, refer to the Installation section.

C2649M (9/07) 11