POWER/ALARM CONNECTION FOR
PIN 2
PIN 1
PIN 11
PIN 12
POWER CONNECTION
FOR STANDALONE MODULE
FIBER OPTIC CABLE
CONTACT CLOSURE, DATA, AND AUDIO COMMUNICATIONS CABLES (REFER TO TABLES C, D, AND E FOR CONNECTOR PIN ASSIGNMENTS AND TO FIGURES
COAXIAL CABLE
TO INSERT OR REMOVE A WIRE, DO THE FOLLOWING:
1.USING THE SUPPLIED SCREWDRIVER, PRESS DOWN ON THE APPROPRIATE CLAMP UNTIL THE SCREWDRIVER IS FIRMLY SEATED IN THE SLOT.
2.INSERT THE WIRE INTO OR REMOVE THE WIRE FROM THE
ASSOCIATED PIN.
3. REMOVE THE SCREWDRIVER.
Figure 7. FT106011 Transmitter/FR106011 Receiver Connections
Table C. Contact Closure Pin Assignments
Pin Number | Contact Closure (CC) |
|
|
1 | In, Common |
|
|
2 | In |
|
|
3 or 4 | Out, Common |
|
|
5 | Out, Normally Open |
|
|
6 | Out, Normally Closed |
|
|
C2649M (9/07) | 19 |