Pelco FR106011 manual Specifications, Video

Specifications

VIDEO
Number of Channels	1
Modulation Type	Pulse code modulation, 10-bit resolution
Video Input (FT106011)/	1.0 Vp-p, 75 ohms, NTSC, PAL, and SECAM
Video Output (FR106011)
Bandwidth	6.5 MHz
Gain	Unity
Differential Gain	<1%
Differential Phase	<0.7°
Tilt	<1%
Signal-to-Noise Ratio	>70 dB (CCIR weighted)
AUDIO
Number of Channels	2
Audio Input (FT106011/	2.9 Vp-p maximum
Audio Output (FR106011)
Input Impedance	600 ohms or 47K ohms, switch-selectable
Input/Output Connection	Balanced (600 ohms) or unbalanced (47K ohms)
Bandwidth	20 kHz
Total Harmonic Distortion	<0.02%
Signal-to-Noise Ratio	>87 dB
DATA
Number of Channels	1
Data Communication	RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase,
	Coaxitron
Maximum Baud Rate	500 kbps
CONTACT CLOSURE
Number of Channels	1
Input	Active low
Output	30 VDC, 1 A maximum
	Choice of normally open or normally closed
GENERAL
Operating Temperature	-40° to 167°F (-40° to 75°C)
Input Power Requirements	12 VDC or 24 VAC, 350 mA
LED Indicators	Power
	Video Present
	Audio Present
	Data Activity
	Contact Closure Activation
	Optic Fault

C2649M (9/07) 35