Pelco FR106011 manual Setting the Data

Table F. Troubleshooting with Front-Panel Indicators (Continued)

Indicator Color	Meaning	Possible Cause		Corrective Action
	Data Activity LED (		)
Flashing amber	Data is being trans-	–		No action required.
	mitted onto the fiber by
	the data port or is
	being received from
	the fiber by the data
	port.
Red	The Data Select switch	The Data Select switch is		Ensure that the Data Select
	is set to an invalid	set to position 6, 7, 8,		switch is set to the correct
	position.	or 9.		position (refer to the
				Setting the Data
				Communication Mode
				section for detailed
				information).
Not lit	Data is not being	Data is not present on		No action required.
	transmitted onto the	the channel.
	fiber by the data port or
		Data connection is faulty.		Check data connections.
	is not being received
		Data communication		Replace cable.
	from the fiber by the
		cable is defective.
	data port.
				(Continued on next page)

32 C2649M (9/07)