Pelco FR106011 manual Setting the Data Communication Mode

Page 14

SETTING THE DATA COMMUNICATION MODE

A Data Select switch, which is a 10-position rotary switch, is provided on the bottom of the FT106011 transmitter and the FR106011 receiver (refer to Figure 5). The Data Select switch allows you to set the data communication mode required for the transfer of data.

With the FT106011 transmitter/FR106011 receiver powered off, set the Data Select switch to the required data communication mode using the supplied screwdriver. Table B lists Data Mode Select switch settings and associated data communication modes as indicated on the bottom of the units.

Note the following:

•The FT106011 transmitter and the FR106011 receiver allow data translation between RS-232 and RS-422 signal levels. Consequently, the Data Select switch can be set to 0 (RS-232) on the transmitter and to 1 (RS-422) on the receiver. Conversely, the Data Select switch can be set to 1 (RS-422) on the transmitter and to 0 (RS-232) on the receiver.

•If you wish to change the data communication mode setting after the FT106011 transmitter/ FR106011 receiver has been powered on, power off the transmitter/receiver, change the data communication mode setting, and then power on the transmitter/receiver again.

14

C2649M (9/07)

Page 13 Page 15
Image 14
Page 13 Page 15
Contents FT106011/FR106011 Fiber Transmitter Receiver Page Contents List of IllustrationsList of Tables Important Safety Instructions Risk of Electric Shock Do not Open Regulatory Notices Radio and Television InterferenceProduct Overview DescriptionSingle-Mode Models ModelsMultimode Models Front Panel Front Panel of FT106011 Transmitter and FR106011 ReceiverRear Panel Setting the Audio Signal and Impedance Mode InstallationPackage Contents Audio Mode Audio Select SwitchSetting the Data Communication Mode Switch Setting Data Select SwitchMounting the TRANSMITTER/RECEIVER Mounting the TRANSMITTER/RECEIVER Into a RackMounting the Transmitter/Receiver Using the Wall Clip Connecting the TRANSMITTER/RECEIVER Power Connection For Standalone Module Fiber Optic Cable Pin NumberPin RS-485 WireBi-Phase RS-232 RS-422Normally Open Contact Closure Wiring RS-232 Data Communication Wiring RS-422 Data Communication Wiring RS-485 2-Wire Half Duplex Data Communication Wiring RS-485 4-Wire Full Duplex Data Communication Wiring Manchester Data Communication Wiring Bi-Phase Data Communication Wiring Balanced Audio Wiring Unbalanced Audio Wiring Troubleshooting Indicator Color Meaning Possible Cause Corrective Action Audio SignalSetting the Data Green Specifications Specifications VideoMechanical C2649M 9/07 Page Product Warranty and Return Information ISO9001
Top Page Image Contents