GE GE About the dispenser, Important Facts About Your Dispenser, To remove Dispenser Tray

Page 10

About the dispenser.*

Water & Ice Dispenser

(See About the controls with temperature settings & About the control features)

Dispenser tray

WARNING Laceration Hazard

„Never put fingers or any other object into ice crusher discharge opening. Doing so can result in contacting the ice crushing blades and lead to serious injury or amputation

„Use a sturdy glass when dispensing ice. A delicate glass may break and result in personal injury.

If no water is dispensed when the refrigerator is first installed, there may be air in the water line system. Press the dispenser paddle for at least five minutes to remove trapped air from the water line and to fill the water system. To flush out impurities in the water line, throw away the first six full glasses of water.

To remove Dispenser Tray

„Pull Dispenser Tray out until it stops.

„Locate tab in the center on the bottom and push up.

„Pull Dispenser Tray assembly out.

„Lift metal Dispenser Tray out at center notch to clean.

To reinstall Dispenser Tray

„Place the Dispenser Tray cover on top of catch tray and position under the two plastic retainers on either side.

„Center Dispenser tray, and align with center guides.

„Push in until it firmly in place.

Important Facts About Your Dispenser

„Do not add ice from trays or bags to the door ice maker bucket. It may not crush or dispense.

„Avoid overfilling glass with ice and use of narrow glasses. Backed-up ice can jam the chute or cause the door in the chute to freeze shut. If ice is blocking the chute remove the ice bucket, poke it through with a wooden spoon.

„Beverages and foods should not be quick-chilled in the door ice maker bin. Cans, bottles or food packages in the storage drawer may cause the ice maker or auger to jam.

„To keep dispensed ice from missing the glass, put the glass close to, but not touching, the dispenser opening.

„Some crushed ice may be dispensed even though you selected CUBED ICE. This happens occasionally when a few cubes accidentally get directed to the crusher.

„After crushed ice is dispensed, some water may drip from the chute.

„Sometimes a small mound of snow will form on the door in the ice chute. This condition is normal and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.

To Use the Internal Water Dispenser*

The water dispenser is located on the left wall inside the refrigerator compart- ment.

To dispense water:

Hold the glass against the recess.

Push the water dispenser button.

Hold the glass underneath the dispenser for 2–3 seconds after releasing the dispenser button. Water may continue to dispense after the button is released.

*Select Models Only

If no water is dispensed when the refrigerator is first installed, there may be air in the water line system. Press the dispenser button for at least 5 minutes to remove trapped air from the water line and to fill the water system. During this process, the dispenser noise may be loud as the air is purged from the water line system. To flush out impurities in the water line, throw away the first 6 glassfuls of water.

NOTE: To avoid water deposits, the dispenser should be cleaned periodically by wiping with a clean cloth or sponge.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents GE Brillion Get Connected Safety Instructions . . . . . . . . . . . .2Preparing to Install Select Models OnlyInstallation Refrigerants Connecting ElectricityProper Disposal of Your OLD Refrigerator GEAppliances.comAbout the features Drop down dairy bin Installing the filter cartridgeDoor ice bin Door ice/water filter Remove filter/bypass plugEnergy Smart About the controls with temperature settingsCubed GFE29, GFE27, DFE29 Control Style C, External ControlChanging the Temperature for Control Style C Changing the Temperature for Control Style aChanging the Temperature for Control Style B Changing Temp. for Control Style DAbout the controls features Control Style C, External Controls Door Alarm Freezer temp controlIce maker setting Controls Style D, Internal Controls GNE26, PWE23Important Facts About Your Dispenser To reinstall Dispenser TrayAbout the dispenser To Use the Internal Water DispenserTo Stop Auto Fill About autofillTo Use Hands Free Auto Fill Important Facts about Auto FillWater Filter Cartridge When to replace the filter cartridgeAbout the GE Rpwf water filter cartridge Removing the filter cartridgeSpillproof Shelves About the fresh food storage optionsRearranging the Shelves Quick Space ShelfNon-Adjustable Bins on the Door Non-Adjustable Dairy BinAdjustable Bins on the Door Tray openTemperature Controlled Drawer About the climate zone Temperature controlled drawerClimateZone To remove About the climate zone and temperature controlled drawerHow to Remove and Replace Drawer Divider To replaceFreezer Basket and Drawer Non-Adjustable Bin in the FreezerAbout the freezer Basket RemovalAbout the automatic ice maker Automatic Ice MakerCare and cleaning of the refrigerator Replacing the lights Refrigerator Lights LEDsPreparation Before YOU BeginTools YOU MAY Need Height to Top of Cabinet Case Depth without Doors Overall Height to Top of Hinge CoverOverall Exterior Case Width Clearances Reinstall the handles using the same procedure as removingRefrigerator Location Remove the Fresh Food Door HandleInstalling the Refrigerator Reinstalling the Refrigerator Doors Remove the Freezer Door Replacing the Freezer DoorPaso Refer to 239D4144P001, Pub NoStep 600 StepRemove Packaging Level the Freezer DoorInitial position Lift by AT-1MEASURE Cabinet Opening Tools YOU will NeedAT-4POSITIONING the Refrigerator Connecting the Refrigerator To the House Water LinePlug in the Refrigerator See the grounding information attached to the power cordTurn on the Water Supply Level the RefrigeratorSelect models only Refrigerator Assembly Instructions, suggested assemblyRefer to 239D4129P002 Pub No GE Appliances General Electric Company Louisville, KYInstalling the Water Line What YOU will NeedChoose the Valve Location ‡1/2 or adjustable wrenchShut OFF the Main Water Supply Drill the Hole for the ValveTighten the Pipe Clamp Fasten the Shutoff ValveConnect the Tubing to the Valve Route the TubingNormal operating conditions „ On models with a dispenser, during water dispense, you mayNon-LCD models Before you call for service…SETTINGS, then Water FILTER. Select LCD modelsCheck that the ice maker is turned on. See Troubleshooting TipsAuto Fill overfills Freezer cooling, fresh food not coolingWhen the refrigerator is installed, or after replac ReplacementRefrigerator control panel to ensure the door alarm is on Avoid odor and taste problemsCan be adjusted to close properly Door removal is always required for installationAccess to final location There is an adjustment to rear wheelsGET Connected Refer to 239D3392P001 Pub NoLoss of food due to spoilage Improper installation, delivery or maintenanceWhat GE Will Not Cover Damage caused after deliveryRpwf Water Filter Cartridge Limited Warranty Performance Data Sheet Model GE Rpwf Water Treatment Device Certificate Number Schedule Service Consumer Support
Related manuals
Manual 48 pages 27.25 Kb Manual 3 pages 9.92 Kb

GE specifications

General Electric, commonly referred to as GE, is a global conglomerate with a diverse portfolio that encompasses several industries including aviation, healthcare, power, renewable energy, and manufacturing. Founded in 1892, GE has established itself as a leader in technology and innovation, driven by a commitment to deliver cutting-edge solutions that address the world’s most pressing challenges.

One of the hallmark features of GE is its strong emphasis on research and development. The company invests billions of dollars each year in R&D, fostering innovation across its various business sectors. This focus on technological advancement has resulted in a myriad of breakthroughs, such as GE's development of advanced jet engines that significantly improve fuel efficiency and reduce emissions, setting new standards in the aviation industry.

In healthcare, GE has revolutionized medical imaging and diagnostic technologies. With products such as MRI machines and ultrasound equipment, GE has led the way in providing high-quality imaging solutions that enhance patient care. The company’s digital healthcare technologies leverage artificial intelligence to improve diagnostics and streamline operations for healthcare providers, ultimately enhancing patient outcomes.

In the energy sector, GE is at the forefront of the shift toward renewable energy. The company develops wind turbines, gas turbines, and energy storage solutions that integrate with traditional power sources to create a more sustainable energy landscape. GE’s commitment to reducing carbon emissions is evident in its innovative technologies that harness the power of wind, solar, and hydroelectric energy.

GE’s digital industrial transformation is another defining characteristic, as it integrates the Internet of Things (IoT) into its operations and product offerings. Through the use of advanced data analytics and machine learning, GE is creating smart and connected solutions that enhance operational efficiency and predictive maintenance across industries.

The company's global presence and commitment to sustainability also contribute to its reputation as a responsible corporate citizen. GE has implemented initiatives to reduce its environmental footprint and improve community engagement around the world.

In summary, General Electric’s main features include its strong focus on R&D, revolutionary healthcare technologies, leadership in renewable energy, digital industrial transformation, and a commitment to sustainability. With a rich history and a forward-looking approach, GE continues to shape industries and improve lives through innovation.
Top Page Image Contents