Cookware, Using the grille | GE 36 specification

Using Your Cooktop

Stainless Steel Cooktop

Cookware

Do not operate a burner for an extended period of time without cookware on the grate. The finish on the grate may chip without cookware to absorb the heat.

Aluminum: Medium-weight cookware is recommended because it heats quickly and evenly. Most foods brown evenly in an aluminum skillet. Use saucepans with tight-fitting lids for cooking with minimum amounts of water.

Cast Iron: If heated slowly, most skillets will give satisfactory results.

Enamelware: Under some conditions, the enamel of some cookware may melt. Follow cookware manufacturer’s recommendations for cooking methods.

Glass: There are two types of glass cookware— those for oven use only and those for surface cooking (saucepans, coffee and teapots). Glass conducts heat very slowly.

Heatproof Glass-Ceramic: Can be used for either surface or oven cooking. It conducts heat very slowly and cools very slowly. Check cookware manufacturer’s directions to be sure it can be used on gas cooktops.

Stainless Steel: This metal alone has poor heating properties, and is usually combined with copper, aluminum or other metals for improved heat distribution. Combination metal skillets generally work satisfactorily if they are used at medium heat as the manufacturer recommends.

Using the grille

(on some models)

Before starting to cook on the grille, be sure the drip tray and liners are in place and that you have the grille racks turned to the side you want for cooking.

Preheat the grille for 15 minutes with the control knob set on HI. When the grille is preheated, place the food on the grille.

Cook it to the desired doneness.

NOTE: The longer you preheat the grille, the darker the grille marks will be on your food.

During cooking it may be necessary to adjust the heat setting. The control knob may be set to any position between HI and LO.

For proper searing and browning, the grille requires high heat.

With large pieces of meat or poultry, you may need to turn the heat to a lower heat setting after the food has been seared. This lower heat setting will allow the food to cook through without burning the outside.

Marinades and barbecue sauce should be added toward the end of cooking time. The heat should be turned to low when sauces are added.

Do not leave the grille unattended while it is on.

When you are finished cooking, allow the grille and the drip trays to cool before cleaning them. They should be cleaned each time they are used.

36 specifications

The GE 36 is a modern, high-performance turbine engine developed by General Electric, primarily used in aviation applications. Renowned for its cutting-edge technologies, the GE 36 engine showcases an impressive blend of efficiency, power, and reliability, making it suitable for various aircraft, particularly in commercial and military sectors.

One of the hallmark features of the GE 36 is its advanced turbofan design. This configuration combines a high bypass ratio with innovative materials and aerodynamics to achieve optimal fuel efficiency while delivering substantial thrust. The engine incorporates lightweight composite materials in its fan and casing, which not only reduces overall weight but also enhances performance and endurance.

The GE 36 is equipped with state-of-the-art digital control systems that allow for precise monitoring and adjustments during flight. These systems utilize advanced algorithms to optimize engine performance, contributing to reduced fuel consumption and lower emissions. Moreover, the digital controls enable real-time diagnostics, allowing technicians to address potential issues promptly and ensuring the engine operates at peak efficiency throughout its lifespan.

A key characteristic of the GE 36 engine is its robust durability. Built to withstand the demanding conditions of flight, the engine undergoes rigorous testing to ensure reliability. Its parts are designed for longevity, reducing the frequency of maintenance interventions. This durability translates into cost savings for operators, as less downtime means increased operational efficiency.

The noise reduction capabilities of the GE 36 also stand out, thanks to its innovative acoustic designs and materials. These technologies mitigate the sound produced during takeoff and landing, aligning with global initiatives to reduce aviation noise pollution in urban areas.

Furthermore, the GE 36 embraces sustainability in its design. The engine supports the use of alternative fuels, allowing operators to comply with evolving environmental regulations while maintaining performance levels. With a focus on reducing the carbon footprint, the GE 36 represents a step forward in green aviation technology.

In summary, the GE 36 engine exemplifies modern aerospace engineering, incorporating advanced materials, digital control systems, and sustainable practices. Its combination of efficiency, performance, and reliability makes it a preferred choice for a wide range of aircraft applications in the competitive aviation landscape. As the industry continues to evolve, the GE 36 stands at the forefront, contributing to the future of aviation technology.