GE 36 owner manual Before performing any service

Page 5

SAFETY PRECAUTIONS

Before performing any service,

DISCONNECT THE COOKTOP POWER SUPPLY AT THE HOUSEHOLD DISTRIBUTION PANEL BY REMOVING THE FUSE OR SWITCHING OFF THE CIRCUIT BREAKER.

Do not leave children alone—children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

Do not allow anyone to climb, stand or hang on the drip tray handles or cooktop. They could damage the cooktop and even tip it over, causing severe personal injury.

Do not store flammable materials near the cooktop.

CAUTION: ITEMS OF INTEREST TO CHILDREN SHOULD NOT BE STORED IN CABINETS ABOVE A COOKTOP— CHILDREN CLIMBING ON THE COOKTOP TO REACH ITEMS COULD BE SERIOUSLY INJURED.

For your safety, never use your appliance for warming or heating the room.

Never wear loose-fitting or hanging garments while using the appliance. Be careful when reaching for items stored over the cooktop. Flammable material could be ignited if brought in contact with burners or burner grates and may cause severe burns.

Use only dry pot holders—moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch burners or burner grates. Do not use a towel or other bulky cloth.

When cooking, do not touch the burners, burner grates, grille or griddle (on some models) or the surrounding areas.

These surfaces may be hot enough to burn.

During and after use, do not touch, or let clothing or other flammable materials contact, the burners, grille or griddle (on some models) or areas near the burners; allow sufficient time for cooling first.

Potentially hot surfaces include the cooktop, areas facing the cooktop and the drip tray handles.

The drip trays can get hot. Do not remove the drip trays until they are cool.

Keep the ventilator hood and grease filters clean to maintain good venting and to avoid grease fires. Turn the ventilator OFF in case of fire or when intentionally “flaming” liquor or other spirits on the cooktop. The blower, if in operation, could spread the flames.

DO NOT obstruct the flow of combustion or ventilation air to the appliance. Be sure a fresh air supply is available.

5

Image 5
Contents Stainless Steel Professional 36″ and 48″ Gas Cooktops Introduction ContentsIf you need service Before using your cooktopWrite down the model & serial numbers If you received a damaged cooktop Save time & moneyImportant Safety Notice Before performing any service Build-up of pressure may cause the container to burst Safety Precautions Design information Features of Your CooktopControl knobs Burners Using Your CooktopSimmering Burner efficiency and flame characteristicsElectronic ignitors Flame height Power failureDo not leave the grille unattended while it is on Using the grilleCookware To season the grill rack Excessive grille flare- ups and flamingGrille rack Grilling hints Before using the griddleGriddle assembly is not to be removed for To season the griddle Using the griddleSeasoning the griddle Ceramic briquettes Control panel and knobs GrilleStainless steel Do not use a steel wool pad it will scratch the surfaceDrip trays, drip tray liners and drain tubes Griddle Burner assembly Not Light Questions? Use this problem solver Problem SolverStainless Steel Cooktop Consumer Services Warranty Registration Ownership Product Consumer Consumer Product Ownership Registration
Related manuals
Manual 16 pages 56.45 Kb

36 specifications

The GE 36 is a modern, high-performance turbine engine developed by General Electric, primarily used in aviation applications. Renowned for its cutting-edge technologies, the GE 36 engine showcases an impressive blend of efficiency, power, and reliability, making it suitable for various aircraft, particularly in commercial and military sectors.

One of the hallmark features of the GE 36 is its advanced turbofan design. This configuration combines a high bypass ratio with innovative materials and aerodynamics to achieve optimal fuel efficiency while delivering substantial thrust. The engine incorporates lightweight composite materials in its fan and casing, which not only reduces overall weight but also enhances performance and endurance.

The GE 36 is equipped with state-of-the-art digital control systems that allow for precise monitoring and adjustments during flight. These systems utilize advanced algorithms to optimize engine performance, contributing to reduced fuel consumption and lower emissions. Moreover, the digital controls enable real-time diagnostics, allowing technicians to address potential issues promptly and ensuring the engine operates at peak efficiency throughout its lifespan.

A key characteristic of the GE 36 engine is its robust durability. Built to withstand the demanding conditions of flight, the engine undergoes rigorous testing to ensure reliability. Its parts are designed for longevity, reducing the frequency of maintenance interventions. This durability translates into cost savings for operators, as less downtime means increased operational efficiency.

The noise reduction capabilities of the GE 36 also stand out, thanks to its innovative acoustic designs and materials. These technologies mitigate the sound produced during takeoff and landing, aligning with global initiatives to reduce aviation noise pollution in urban areas.

Furthermore, the GE 36 embraces sustainability in its design. The engine supports the use of alternative fuels, allowing operators to comply with evolving environmental regulations while maintaining performance levels. With a focus on reducing the carbon footprint, the GE 36 represents a step forward in green aviation technology.

In summary, the GE 36 engine exemplifies modern aerospace engineering, incorporating advanced materials, digital control systems, and sustainable practices. Its combination of efficiency, performance, and reliability makes it a preferred choice for a wide range of aircraft applications in the competitive aviation landscape. As the industry continues to evolve, the GE 36 stands at the forefront, contributing to the future of aviation technology.