GE 36 owner manual Burner assembly

Page 18

Care and Cleaning

Stainless Steel Cooktop

Burner assembly

The burner assemblies should be washed regularly and, of course, after spillovers.

Turn all the controls to OFF before removing the burner parts.

The electrode of the spark ignitor is exposed beyond the top of the burner. When cleaning the burner tray, be careful not to snag the electrode of the spark ignitor with your cleaning cloth. Do not hit the spark ignitor. Be careful not to turn on any surface controls while cleaning the burner tray. A slight electrical shock might result which could cause you to knock over hot cookware.

The burner grates and burner caps can be lifted off, making them easy to clean. Removing them gives you access to the burner bases.

To avoid snagging cloth on the spark ignitors, leave burner caps in place when cleaning the burner tray.

The burners have been designed in two pieces for ease of cleaning. When the burner grate and the burner are cool, remove the grate. The burner caps can easily be lifted off.

Wash these parts in hot soapy water, rinse and dry thoroughly.

A bristle brush can be used to clean out the burner ports, if necessary.

The burner grates are porcelain enamel. When cool, they may be wiped clean using hot, soapy water, then rinsed and wiped dry. When lifting the burner grates, be careful as they are heavy.

Place them on a protected surface so they won’t scratch the surface of the cooktop.

Ignitor

Simmer cap

Outer cap/ burner ports

Burner

Locating pin

base

 

CAUTION:

Do not operate the burner without all burner parts in place.

After cleaning, it is important to make sure the indentation on the bottom side of the outer cap/burner port is properly aligned with the corresponding locating pin in the burner base. Incorrect alignment will produce poor burner performance.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Stainless Steel Professional 36″ and 48″ Gas Cooktops Contents IntroductionWrite down the model & serial numbers Before using your cooktopIf you need service If you received a damaged cooktop Save time & moneyImportant Safety Notice Before performing any service Build-up of pressure may cause the container to burst Safety Precautions Features of Your Cooktop Design informationUsing Your Cooktop Control knobs BurnersBurner efficiency and flame characteristics Electronic ignitorsSimmering Power failure Flame heightUsing the grille CookwareDo not leave the grille unattended while it is on Excessive grille flare- ups and flaming Grille rackTo season the grill rack Before using the griddle Griddle assembly is not to be removed forGrilling hints Using the griddle Seasoning the griddleTo season the griddle Stainless steel Control panel and knobs GrilleCeramic briquettes Do not use a steel wool pad it will scratch the surfaceDrip trays, drip tray liners and drain tubes Griddle Burner assembly Questions? Use this problem solver Problem Solver Not LightStainless Steel Cooktop Consumer Services Warranty Registration Ownership Product Consumer Consumer Product Ownership Registration
Related manuals
Manual 16 pages 56.45 Kb

36 specifications

The GE 36 is a modern, high-performance turbine engine developed by General Electric, primarily used in aviation applications. Renowned for its cutting-edge technologies, the GE 36 engine showcases an impressive blend of efficiency, power, and reliability, making it suitable for various aircraft, particularly in commercial and military sectors.

One of the hallmark features of the GE 36 is its advanced turbofan design. This configuration combines a high bypass ratio with innovative materials and aerodynamics to achieve optimal fuel efficiency while delivering substantial thrust. The engine incorporates lightweight composite materials in its fan and casing, which not only reduces overall weight but also enhances performance and endurance.

The GE 36 is equipped with state-of-the-art digital control systems that allow for precise monitoring and adjustments during flight. These systems utilize advanced algorithms to optimize engine performance, contributing to reduced fuel consumption and lower emissions. Moreover, the digital controls enable real-time diagnostics, allowing technicians to address potential issues promptly and ensuring the engine operates at peak efficiency throughout its lifespan.

A key characteristic of the GE 36 engine is its robust durability. Built to withstand the demanding conditions of flight, the engine undergoes rigorous testing to ensure reliability. Its parts are designed for longevity, reducing the frequency of maintenance interventions. This durability translates into cost savings for operators, as less downtime means increased operational efficiency.

The noise reduction capabilities of the GE 36 also stand out, thanks to its innovative acoustic designs and materials. These technologies mitigate the sound produced during takeoff and landing, aligning with global initiatives to reduce aviation noise pollution in urban areas.

Furthermore, the GE 36 embraces sustainability in its design. The engine supports the use of alternative fuels, allowing operators to comply with evolving environmental regulations while maintaining performance levels. With a focus on reducing the carbon footprint, the GE 36 represents a step forward in green aviation technology.

In summary, the GE 36 engine exemplifies modern aerospace engineering, incorporating advanced materials, digital control systems, and sustainable practices. Its combination of efficiency, performance, and reliability makes it a preferred choice for a wide range of aircraft applications in the competitive aviation landscape. As the industry continues to evolve, the GE 36 stands at the forefront, contributing to the future of aviation technology.
Top Page Image Contents