Flashing display lights, Using the dishwasher

About the dishwasher control panel.

Safety Instructions

5Start

Close the dishwasher door and select the cycle and desired enhancements. Touch the START/RESET pad to begin the cycle. Water fill begins, and approximately 60 seconds later the wash action begins.

NOTE: The dishwasher remembers your last cycle so you don’t have to reprogram each time. When the dishwasher door is fully closed, the control panel lights will display the last settings you selected.

6Clean

The CLEAN light is illuminated when a wash cycle is complete. The light will stay ON until the door is opened and then closed and latched or when a pad is pressed with the door closed. You can turn off the CLEAN light by pressing any pad when the door is latched.

If you don’t want to change any of the settings, simply touch the START/RESET pad to begin the cycle.

If the door is closed, the indicator lights will turn

off if the START/RESET pad is not selected within two minutes. To activate the display, open and close the door or press any pad.

Also, if a power failure occurs, NORMAL and HEAT DRY will automatically be programmed. Make any new selections and touch the START/RESET pad to begin the cycle.

Operating Instructions

Tips

Flashing display lights.

	Status Indicator Lights	What It Means
	START/RESET	Cycle has been interrupted by pressing the START/RESET pad. Light will stop
		flashing after the dishwasher automatically drains out the water.
Using the dishwasher.

Check the Water Temperature

The entering water should be at least 49°C (120°F) and	faucet nearest the dishwasher, place the thermometer in
not more than 65°C (150°F) for effective cleaning and to	a glass and let the water run continuously into the glass
prevent dish damage. Check the water temperature with	until the temperature stops rising.
a candy or meat thermometer. Turn on the hot water

Use Rinse Agent

Rinse agents remove spots and prevent new film buildup on your dishes, glasses, flatware, cookware and plastic.

Filling the Dispenser

Troubleshooting

The rinse agent dispenser holds 100 ml (3.5 fl. oz.) of rinse agent. Under normal conditions, this will last approximately one month. Try to keep it full, but do not overfill.

1Make sure the dishwasher door is fully open.

2Turn the dispenser cap to the left and lift it out.

3Add rinse agent until the indicator window looks full.

4Clean up any spilled rinse agent with a damp cloth.

5Replace the dispenser cap.

Indicator
window	Dispenser cap

Support

Rinse Aid Setting

The amount of rinse agent released into the final wash can be adjusted. The factory setting is at the midpoint. If there are rings of calcium (hard water) spots on dishes, try a higher setting. If you see foam in the dishwasher, move the indicator to a lower setting.

To adjust the setting

Remove the dispenser cap; then turn the adjuster counterclockwise to increase the amount of rinse agent, clockwise to reduce the amount of rinse agent.

Rinse agent adjuster

Consumer

Dish Preparation Prior to Loading

	■ No prerinsing of normal food soil is required.	■ Remove leafy vegetables, meat trimmings and
	■ Scrape off hard soils, including bones, toothpicks, skins	excessive amounts of grease or oil.
6	and seeds.	■ Remove acidic food soils that can discolor stainless

■ Remove large quantities of any remaining food.	steel.

GLD6900 Series, PDW7000 Series specifications

The GE PDW7000 Series and GLD6900 Series are both distinguished lines of dishwashers that combine efficiency, innovative technology, and user-friendly features, aiming to enhance the dishwashing experience.

Starting with the PDW7000 Series, these dishwashers are characterized by their sleek designs and robust performance capabilities. They come equipped with GE's proprietary UltraWash® System, which uses advanced wash arms and targeted spray jets to deliver exceptional cleaning performance. The dishwashers also feature a built-in SmartDispense™ technology that automatically dispenses the right amount of detergent based on the load size and soil level, ensuring optimal cleaning while minimizing waste.

The PDW7000 Series includes a variety of wash cycles, such as Heavy, Normal, and Quick cycles, allowing users to select the perfect setting depending on their washing needs. The addition of a stainless steel interior not only enhances durability but also improves drying performance. The model also boasts flexible loading options with its adjustable upper rack, allowing users to easily accommodate oversized items.

On the other hand, the GE GLD6900 Series showcases an equally compelling combination of technology and design. This series also employs the UltraWash® System, ensuring thorough cleaning results. However, it enhances user convenience with its innovative Piranha™ hard food disposer with a removable filter. This feature effectively pulverizes food particles, preventing clogs and keeping the dishwasher running smoothly.

One of the standout characteristics of the GLD6900 Series is its quiet operation. With noise levels as low as 47 dBA, this series is designed to minimize distractions, making it an excellent choice for open floor plans or homes with sleeping children. Moreover, it includes a convenient Delay Start option, allowing users to schedule their washes for a more convenient time.

Both series include features like a sanitize cycle that eliminates 99.9% of bacteria, ensuring dishes not only come out clean but also hygienic. Energy efficiency is also a priority; both the PDW7000 and GLD6900 Series are ENERGY STAR® qualified, helping consumers save on their utility bills while reducing their environmental footprint.

In summary, the GE PDW7000 Series and GLD6900 Series offer advanced cleaning technologies and thoughtful features to accommodate modern kitchen demands. With their focus on efficiency, quiet operation, and flexible loading options, they truly represent the future of dishwashing technology.