GE CDT725-765, PDT750-760, GDT580-740, GDF570 To remove the 3rd rack, To replace the 3rd rack

GEAppliances.com

The 3rd rack is also removable to allow extra large items to be placed in the upper rack:

To remove the 3rd rack:

1 Remove the silverware and utensil trays. (See the IMPORTANT NOTES in this section.)

2	Push the rack all the way to one side so that
	a gap between it and the side rail forms on
	the other side. Align the side rail posts with
	the center of the clips on the rack and lift
	straight up.
	Rail posts	Align rail posts with
	on inside	rack clips - Pull rack up
	of rails
	Rack
	clips
Rail Rack
	Push rack to
	one side
	Rail post		Rail
			post
	will slide
	in or out
	of this
	opening
		Rack	Rail
		clip

3

4

Continuing to hold the rack in the lifted position, repeat on the other side.

Once the rack is removed, push the side rails all the way back into the dishwasher.

To replace the 3rd rack:

1 Extend both side rails fully out of the dishwasher.

2 Orient the rack so that its side clips are aligned and centered with the posts on the side rail and lower the clips onto the posts.

3 Move the rack to one side of the dishwasher until the clips fall onto the posts.

Rack clips

Rack

clipsRail post

Rack

clipRail

4 Continuing to hold the rack in the lifted position, repeat on the other side.

5 Once the rack is replaced, pull it all the way out to lock it in place in its side rails.

Pull rack all the way out to lock it in place

6

Rail

posts

Replace the silverware and utensil trays.

19