Installation Instructions
Washer
If you have any questions, call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com. In Canada, visit www.geappliances or call 1.800.561.3344.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•IMPORTANT – Save these instructions for local inspector’s use.
•IMPORTANT – Observe all governing codes and ordinances.
•Note to Installer – Be sure to leave these instructions with the Consumer.
•Note to Consumer – Keep these instructions for future reference.
•Skill level – Installation of this appliance requires basic mechanical and electrical skills.
•Completion time – 1-3 hours
•Proper installation is the responsibility of the installer.
•Product failure due to improper installation is not covered under the Warranty.
FOR YOUR SAFETY:
WARNING
•This appliance must be properly grounded and installed as described in these Installation Instructions.
•Do not install or store the appliance in an area where it will be exposed to water/weather. See the Location of Your Washer section.
•NOTE: This appliance must be properly grounded, and electrical service to the washer must conform with local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70.
TOOLS REQUIRED FOR
WASHER INSTALLATION
1/4″ nut driver
3/8″ socket with ratchet
3/8″
Adjustable wrench or 7/16″ socket with ratchet
Adjustable wrench or 9/16″
Carpenter’s level
PARTS SUPPLIED
Cable Tie
Water Hoses (2)
Hose Guide
STACK BRACKET KIT
A stack bracket kit is available at additional cost. It can be ordered in the United States by visiting our website at GEAppliances.com or calling 800.
GE.CARES. Order kit #WE25X10018 or GEFLSTACK.
In Canada, please contact your nearest parts retailer.
14