Cleaning Troubleshooting Tips Consumer

ge.com

Safety

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket— it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Cleaning the Oven Door

To clean the inside of the door:

■Because the area inside the gasket is cleaned during the self-cleaning cycle, you do not need to clean this by hand.

■The area outside the gasket and the door liner can be cleaned with a soap-filled or plastic scouring pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

■Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door. Do not let water drip into the vent openings.

■If any stain on the door vent trim is persistent, use a soft abrasive cleaner and a sponge-scrubber for best results.

■Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

■Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Instructions Operating Instructions Care

Lift-Off Oven Door

and

Slot

Hinge lock

Pull hinge locks down to unlock.

Removal position

The door is very heavy. Be careful when removing and lifting the door.

Do not lift the door by the handle.

To remove the door:

Fully open the door.

Pull the hinge locks down toward the door frame, to the unlocked position. A tool, such as a small flat-blade screwdriver, may be required.

Firmly grasp both sides of the door at the top.

Close door to the door removal position, which is halfway between the broil stop position and fully closed.

Lift door up and out until the hinge arm is clear of the slot.

To replace the door:

Firmly grasp both sides of the door at the top.

With the	Bottom	Hinge arm
door at the	edge	Hinge arm
door at the	edge
same angle as	of slot
the removal
position, seat the
indentation of		Indentation
the hinge arm
into the bottom
edge of the hinge slot. The notch in
the hinge arm must be fully seated
into the bottom of the slot.

Fully open the door. If the door will not fully open, the indentation is not seated correctly in the bottom edge of the slot.

Push the hinge locks up against the front frame of the oven cavity to the locked position.

Hinge lock

Hinge arm

Push hinge locks up to lock.

Close the oven door.

Support

WB48X10056, WB48X10057 specifications

The GE WB48X10057 and WB48X10056 are popular replacement oven range parts, specifically designed for GE ovens. These components are widely recognized for their reliability and high performance, which are essential in the kitchen environment. Both models play a crucial role in maintaining the efficiency of various electric and gas range systems.

The WB48X10057 is a bake element, typically located at the bottom of the oven. Its primary function is to generate heat for baking. This model is crafted from durable metal materials that are designed to withstand high temperatures while ensuring even heat distribution throughout the oven. With a power rating that allows for quick heating, it significantly reduces the baking time and enhances the cooking experience. This element is also straightforward to install, requiring minimal tools, which makes it a favorite among DIY enthusiasts and professional technicians alike.

On the other hand, the WB48X10056 is the oven broil element, which is situated at the top of the oven. This component is designed for broiling and browning foods effectively, providing a high-heat source. Its design allows for intense, direct heating, which is perfect for achieving a golden brown finish on meats, casseroles, and more. Like the bake element, the broil element is made from robust materials that can handle the heat and stress of cooking environments.

Both models are equipped with safety features that prevent overheating and ensure longevity. They are characterized by their compatibility with various GE oven models, making them versatile choices for users looking to replace worn-out parts. These elements are easy to find due to their widespread use, and they come with detailed installation instructions to assist users in the replacement process.

In terms of technology, these elements utilize advanced resistance heating technology, which allows for efficient energy consumption and minimizes electricity use while maximizing cooking performance. Their design incorporates features that promote energy efficiency, which not only lowers utility bills but also supports environmentally friendly practices.

In conclusion, the GE WB48X10057 and WB48X10056 are essential components for maintaining the functionality and performance of GE ovens. With their robust construction, ease of installation, and safety features, these oven elements are a reliable choice for anyone looking to enhance their cooking experience.