10.A view of the caps inserted in the PCB. Note that the negative or “minus” side of the caps and their “dashed” markings are facing away from you. Also note the “plus” sign written on the PCB. (Fig 16)
Minus
signs
on
caps
Plus signs on PCB
© 2007 Stephen Beck
Fig. 16
11.Solder the 4 wire leads on the same side of the PCB you
12.Use your wire cutters to cut off the leads just above the solder connection. With any luck or skill, your connections should look like this. (Fig 17)
© 2007 Stephen Beck
Fig. 17
© 2007 by Stephen Beck V1.0 | Page 13 of 19 | Use at your Own Risk |