Maytag MFI2568AEW manual By Stephen Beck Use at your Own Risk

Page 16

5.GENTLY place the (2) small tabs on the clear plastic cover into the slots on the left hand side of the opening for the PCB (Fig 24)

© 2007 Stephen Beck

Fig. 24

6.GENTLY close the clear plastic cover, engaging the latch on the right hand side.

7.You are now ready to test the fridge. (Yay again !) ☺

© 2007 by Stephen Beck V1.0

Page 16 of 19

Use at your Own Risk

Image 16

Contents MFI2568AEW Important Safety Reminders and Legal Stuff Don’t Skip Overview Technical stuffParts and Supplies List Step-By-Step procedures Unplug the fridgePower to flapper door and water dispenser View looking down from the top Ice/water dispenserFixing the HV Control Board Remove the PCB from the fridgeOne good cap Release Clip. All 4 connectors similar By Stephen Beck Use at your Own Risk Positive Terminal Negative Replace the CapsMinus Signs Negative Terminal Minus signs Negative TerminalsMinus Sign Minus Signs Caps Plus signs on PCB By Stephen Beck Use at your Own Risk Re-install the PCB By Stephen Beck Use at your Own Risk Testing the Fridge Caution Required Optional Plug the flapper door back View looking down from the top Ice/water dispenser