Fixing the HV Control Board.
Remove the PCB from the fridge:
1.Start by rolling out your fridge from where it’s stashed. You’ll need to access the back of the fridge.
2.Unplug the fridge (if it’s not already). This is a Safety Step – don’t skip it.
3.Locate the metal cover plate and the (4) ¼” screws securing it at the corners (Fig 3):
©2007 Stephen Beck
Fig. 3
4.Use the ¼” nut driver (or socket and ratchet) and remove the screws.
5.You should now be looking at the HV Control Board behind a hard clear plastic cover (Fig 4.):
©2007 Stephen Beck
Fig. 4
© 2007 by Stephen Beck V1.0 | Page 7 of 19 | Use at your Own Risk |