Greenheck Fan GGH20 manual 473380, Grease Grabber H 2O, Auto-Cleaning Hood

Page 1

 

Part #473380

 

Grease Grabber™ H2O

®

Auto-Cleaning Hood

 

Installation,Installation,Operation andMaintenanceManualManual

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Model GGH2O

General Safety Information

Only qualified personnel should install this unit. Personnel should have a clear understanding of these instructions and should be aware of general safety precautions. Improper installation can result in electric shock, possible injury due to coming in contact with moving parts, as well as other potential hazards. Other considerations may be required if seismic activity

is present. If more information is needed, contact a licensed professional engineer before moving forward.

1.Follow all local electrical and safety codes, as well as the National Electrical Code (NEC), the National Fire Protection Agency (NFPA), where applicable.

Follow the Canadian Electric Code (CEC) in Canada.

DANGER

Always disconnect power before working on or near a unit. Lock and tag the disconnect switch or breaker to prevent accidental power up.

CAUTION

When servicing the unit, motor may be hot enough to cause pain or injury. Allow motor to cool before servicing.

1 Model GGH20 Grease Grabber Auto-Cleaning Hood

®

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Model GGH2O General Safety Information Auto-Cleaning Hood473380 Grease Grabber H 2OReceiving Inspection and Maintenance during StorageUnpacking HandlingGrease Grabber H2O System Function Table of ContentsFire Mode Cleaning CycleManual Engagement Automatic EngagementHood System ComponentsGrease Grabber H2O Control Cabinet Graphic KeypadUnpacking Hood Width and Base Weights= 770 lbs = 890 lbsFiller Panels Installation OverviewHood Hanging Height Installing U-Channel StripDouble Island Style Hoods Continuous Capture Plenum HoodsUsing the Supply Plenum Clip Option #1 Installing External Supply PlenumsDuctwork ExhaustUsing the Threaded Rod Option #3 Using the Uni-Strut Option #2Installing the Supply Duct Collar to the Plenum External Supply Plenum Weights, Dimensions and Supply RatesInstalling the Back Supply Plenum Using the UL Listed Fastener ProvidedInstalling the Supply Duct Collar Hanging the Back Supply PlenumAir Diffusers Hanging the HoodInstalling End Skirts Installing Enclosure PanelsFlat backsplash panel Material gauge Stainless Installing Backsplash PanelsOverview of exhaust and supply plenum locations Installing Duct CollarPlumbing Pump InstallationPlumbing Connections Preventative Maintenance Detergent Tank InstallationElectrical Wiring ElectricalTimer Programming Hour / 7 Day Daily Operation of the GGH2O Hood Initial System Start-UpInitiating the wash cycle Interior of CabinetNormal Fan Operation Sequence of Operation Grease Grabber H2OCalculation Example Airflow Testing ProcedureHood Length Test Location Off left in inches Velocity Reading fpmPRM Amerex Wiring Plan ViewAnsul SNAP-ACTION Switch Ansul Wiring Plan ViewCOM Wiring DiagramCapture Tank MaintenanceFilters FloatsReplacement Parts TroubleshootingWash Nozzles Repair KitsStart-Up Grease Grabber H2O Start-Up ChecklistMiscellaneous Hook-UpWarranty Maintenance Log
Top Page Image Contents