Maytag W10289681A, W10289680A Accessories, Water dispenser will not operate properly

Page 12

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

The water dispenser will not operate properly

Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

Kink in the home water source line? Straighten the water source line.

New installation? Flush and fill the water system.

Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements.”

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

Glass not being held under the dispenser long enough? Hold the glass under the dispenser for 2 to 3 seconds after releasing the dispenser lever/pad.

New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough (on some models)

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

New installation? Allow 24 hours after installation for the water supply to cool completely.

Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

ACCESSORIES

To order stainless steel cleaner or replacement filters, call

1-800-688-9900and ask for the appropriate part number listed below or contact your authorized MAYTAG® Appliances dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

Standard Base Filter Cartridge:

Order Part #4396841 (T2RFWG2 and P2RFWG2)

12

Image 12
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer Location Requirements Electrical RequirementsWater Supply Requirements Recommended Grounding MethodConnect Water Supply Water PressureReverse Osmosis Water Supply Connect to Water LineUsing the Controls Complete the InstallationAdjusting the Controls Refrigerator USEConvertible Drawer Temperature Control Additional FeaturesCondition Temperature Adjustment Cooling On/OffCrisper Humidity Control Chilled Door BinWater and Ice Dispensers Ice Maker and Storage Bin Water Filtration SystemCleaning To Clean Your RefrigeratorRefrigerator Care Changing the Light BulbsTroubleshooting Refrigerator OperationTemperature and Moisture Ice and WaterAccessories Water dispenser will not operate properlyWater is leaking from the dispenser Dispenser water is not cool enough on some modelsWater Filter Certifications Performance Data Sheets Base Grille Water Filtration SystemBase Grille Water Filtration System Base Grille Water Filtration System Base Grille Water Filtration System Maytag Major Appliance Warranty Limited WarrantyItems Excluded from Warranty This limited warranty does not coverInstrucciones Para EL Usuario DEL Refrigerador Seguridad DEL RefrigeradorInstrucciones DE Instalación Desempaque el refrigeradorRequisitos de ubicación Antes de tirar su viejo refrigerador o congeladorRequisitos eléctricos Requisitos del suministro de aguaConexión del suministro de agua Conexión al refrigerador Estilo Uso de los controles Cómo terminar la instalaciónCómo ajustar los controles Control de temperatura del Cajón convertible Depósito enfriador de la puertaEncendido/Apagado del enfriamiento Características adicionalesDespachadores de agua y hielo Para despachar hieloEl despachador de agua Para despachar aguaFábrica de hielo y depósito Sistema de filtración de aguaCuidado DE SU Refrigerador LimpiezaCómo cambiar los focos Cómo cambiar el filtro de aguaSolución DE Problemas Funcionamiento del refrigeradorTemperatura y humedad Hielo y aguaAccesorios El despachador de hielo no funciona debidamenteHay fugas de agua del despachador El despachador de agua no funciona debidamenteHoja DE Datos DEL Rendimiento Sistema de filtración de agua de la rejilla de la baseSistema de filtración de agua de la rejilla de la base Sistema de filtración de agua de la rejilla de la base Sistema de filtración de agua de la rejilla de la base Maytag Garantía LimitadaExclusiones DE LA Garantía Esta garantía limitada no cubreInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions Dinstallation Exigences demplacementDéballage du réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurMéthode recommandée de mise à la terre Spécifications électriquesSpécifications de l’alimentation en eau Pression de leauRaccordement de la canalisation deau Raccordement à une canalisation d’eauRaccordement au réfrigérateur Style Utilisation des commandes Achever l’installationAjustement des commandes Utilisation DU RéfrigérateurAlarme de porte entrouverte Refroidissement On/Off marche/arrêtCaractéristiques supplémentaires Condition Ajustement DE LA TempératureCommande de température dans Le tiroir convertible Distributeurs d’eau et de glaçonsMachine à glaçons et bac dentreposage Distribution de glaceLa lampe du distributeur Le verrouillage du distributeurEntretien DU Réfrigérateur Système de filtration de leauNettoyage Remplacement des ampoules d’éclairage Dépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauAccessoires Le distributeur de glaçons ne fonctionne pas correctementLe distributeur deau ne fonctionne pas correctement De leau suinte du distributeurFeuilles DE Données SUR LA Performance Système de filtration deau de la grille de la baseSystème de filtration deau de la grille de la base 909 mg/L Mg/L ± 10 % 05 mg/L 97,4 Particules classe 4200 #/mL 1900 #/mL 99,9 Garantie DE Gros Appareil Ménager Maytag Garantie LimitéeÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasW10289681A EN/FR PN W10289680A

W10289680A, W10289681A specifications

Maytag, renowned for its durable and high-performance appliances, continues to innovate with the release of its key components, the W10289681A and W10289680A. These parts are designed specifically for Maytag washers and dryers, enhancing functionality and efficiency.

The W10289681A is a water inlet valve that plays a crucial role in controlling the flow of water into your washing machine. By utilizing advanced technology, it ensures accurate water levels for optimal washing performance. This part is designed with a high-strength construction to withstand wear and tear, ensuring longevity and reliability. The valve also features a dual inlet design, allowing both hot and cold water to flow into the machine, facilitating versatile washing cycles tailored to different fabric types and soiling levels.

The W10289680A, on the other hand, is a crucial part of the dryer system, specifically the thermal fuse. It serves as a safety feature that prevents the dryer from overheating, thereby protecting both the appliance and your home. When the internal temperature exceeds a predetermined limit, the thermal fuse disconnects the power, effectively shutting down the machine and preventing potential hazards. This safety mechanism is integral in prolonging the life of the dryer and ensuring safe operation.

Both components exemplify Maytag's commitment to quality and customer satisfaction. They are easy to install, making them user-friendly options for DIY repairs. Furthermore, these parts adhere to stringent industry standards, ensuring compatibility with a variety of Maytag washer and dryer models.

In addition to their individual functions, these components work in harmony to enhance the overall performance of the laundry system. The effective water control and safety features provided by the W10289681A and W10289680A ensure that laundry can be done efficiently and safely, reflecting the modern demands of household chores.

Overall, investing in Maytag parts like the W10289681A and W10289680A not only ensures the functionality of your appliances but also promotes a hassle-free laundry experience. With a focus on innovation, safety, and durability, Maytag solidifies its reputation as a leading brand in home appliances.