Maytag W10366206A Using the Controls, Electronic Controls, Digital Controls

Page 12

Using the Controls

Your model may have either Electronic or Digital Controls.

IMPORTANT:

■Wait 24 hours for your refrigerator to cool completely before adding food. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster.

■The recommended settings should be correct for normal household refrigerator use. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

■If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.

Electronic Controls

For your convenience, the temperature controls are preset at the factory. When you first install your refrigerator, make sure the controls are still set to the recommended setting as shown.

Style 1

Recommended Setting “4”

Style 2

Recommended Setting “4”

Adjusting Controls

If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart below as a guide.

To adjust the temperature:

Style 1–Press the up or down arrow touch pads

Style 2–Press the plus or minus sign touch pads.

Except when first turning on the refrigerator, do not adjust the control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize.

CONDITION/REASON:

ADJUSTMENT:

 

 

REFRIGERATOR too warm

REFRIGERATOR

 

Control one setting

 

higher

 

 

FREEZER too warm/too little ice

FREEZER Control one

 

setting higher

 

 

REFRIGERATOR too cold

REFRIGERATOR

 

Control one setting

 

lower

 

 

FREEZER too cold

FREEZER Control one

 

setting lower

Digital Controls

For your convenience, your temperature controls are preset at the factory. When you first install your refrigerator, make sure the controls are still set to the Initial settings as shown.

Initial Settings

To Turn Off/On:

Style 1–Press the freezer minus sign touch pad until a

dash (-) appears in both the refrigerator and freezer displays. Neither compartment will cool.

Style 2–Press the freezer down arrow touch pad until a dash (-) appears in both the refrigerator and freezer displays. Neither compartment will cool.

Humidity Control (on some models)

The humidity control turns on a heater to help reduce moisture on the door hinge seal. Use in humid environments or when you notice moisture on the door hinge seal. The refrigerator uses more energy when Humidity Control is on.

■Press the control to ON when the environment is warm and more humid, or if you notice moisture on the door hinge seal.

■Press the control to OFF to save energy when the environment is less humid.

IMPORTANT: When the power is on, the temperature display shows the set point temperature of the compartment.

To Turn Your Refrigerator Off/On:

■Press both the freezer and refrigerator (+) touch pads repeatedly until “OFF” appears in the displays. Allow a few seconds for the refrigerator to shut off. Neither compartment will cool.

■Press both the refrigerator and freezer (-) touch pads to turn on the refrigerator.

Adjusting Digital Controls

The REFRIGERATOR control adjusts the refrigerator compartment temperature. The FREEZER control adjusts the freezer compartment temperature.

If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart as a guide.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer Remove the PackagingClean Before Using Location RequirementsElectrical Requirements Recommended Grounding MethodWater Supply Requirements Connect the Water SupplyWater Pressure Reverse Osmosis Water SupplyComplete the Installation Connect to RefrigeratorStyle Refrigerator Doors and Drawer Remove and Replace Refrigerator Door Handles Standard DoorFrench Doors Remove Door and Hinges Standard DoorReverse Door Standard Door optional Replace Door and Hinges Standard DoorCabinet Refrigerator doorRemove and Replace Freezer Drawer Remove and Replace Drawer HandleRemove Drawer Front Replace Drawer FrontDoor Removal Replacement Door Swing Reversal optional Standard DoorDrawer Front Removal Drawer Front Replacement Refrigerator USE Door Closing and Door AlignmentOpening and Closing Doors Using the Controls Electronic ControlsDigital Controls To Adjust Set Point Temperatures Additional Digital Control Center Features Fast CoolDoor Alarm Reset FilterCrisper Humidity Control Ice MakerWater Dispenser Cleaning Refrigerator CareWater Filtration System Troubleshooting Changing the Light BulbRefrigerator Operation Temperature and Moisture Ice and WaterWater Filter Certifications Water dispenser will not operate properlyWater is leaking from the dispenser system Water from the dispenser is warmPerformance Data Sheets Application Guidelines/Water Supply ParametersModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters Maytag Major Appliance Warranty Limited WarrantyItems Excluded from Warranty This limited warranty does not coverInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions D’INSTALLATION Déballage du réfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Enlèvement des matériaux d’emballageExigences demplacement Méthode recommandée de mise à la terreSpécifications électriques Raccordement de la canalisation deau Pression de leauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauAchever l’installation Raccordement au réfrigérateurPortes et tiroir du réfrigérateur Porte à deux battantsDépose des portes et des charnières Porte standard Réinstallation Porte et charnières Porte standard CaissePorte du compartiment de réfrigération Porte du compartiment de congélationRetirer et réinstaller le tiroir du congélateur Dépose et réinstallation de la poignée du tiroirRéinstallation de la façade du tiroir Portes à deux battantsInversion du sens douverture de la porte facultatif Porte standardCharnières supérieures Portes à deux battantsFermeture et alignement de la porte Utilisation des commandes Commandes électroniquesUtilisation DU Réfrigérateur Ouverture et fermeture des portesCommandes numériques Ajustement des réglages de commandeAjustement des réglages de commande numérique Pour ajuster les points de réglage de températureTemp Alarm alarme de dépassement de température Door Alarm avertisseur de la porteReset Filter réinitialisation du filtre Préférences de lutilisateur avec la commande numériqueMachine à glaçons Distributeur d’eauMise en marche/arrêt de la machine à glaçons Taux de production des glaçonsEntretien DU Réfrigérateur Système de filtration de leauNettoyage Remplacement de l’ampoule d’éclairage DépannageFonctionnement du réfrigérateur Température et humidité Glaçons et eauLes glaçons sont creux ou petits Mauvais goût, odeur ou couleur grise des glaçonsLe distributeur deau ne fonctionne pas correctement ’eau coule du système de distributionFeuilles DE Données SUR LA Performance Système de filtration d’eau intérieurModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Garantie DE Gros Appareil Ménager Maytag Garantie LimitéeÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage Page Page Page W10366206A SP PN W10366207A

W10366206A specifications

The Maytag W10366206A is a highly regarded kitchen appliance, specifically designed as a replacement part for various Maytag appliances. This component showcases the brand's commitment to quality and durability, ensuring that it meets the demanding needs of everyday use in modern kitchens.

One of the standout features of the W10366206A is its robust construction. Made with high-quality materials, it is engineered to withstand the rigors of frequent operation, contributing to the longevity of the appliance it serves. This durability is a hallmark of Maytag, a brand known for its emphasis on reliability and performance.

The W10366206A is compatible with a range of Maytag models, which adds to its appeal. This versatility allows consumers to replace worn or damaged parts without the need to purchase an entirely new appliance. This not only saves money but also reduces waste, aligning with sustainable practices that many consumers value today.

In terms of technology, the W10366206A embodies innovative design. This part is designed with precision to ensure a seamless fit and effective operation within your kitchen appliance. Its design includes features that facilitate easy installation, making it a user-friendly option for those who might prefer to make repairs themselves.

Another important characteristic of the W10366206A is its efficiency. By ensuring that appliances operate at their optimal levels, this replacement part contributes to energy savings, which is increasingly important in today’s eco-conscious environment. With energy-efficient performance, consumers can expect to see reductions in utility bills while enjoying consistent service from their Maytag appliances.

Moreover, Maytag's commitment to customer satisfaction is evident in the extensive testing and quality control that the W10366206A undergoes before reaching consumers. This rigorous process ensures that every part meets high standards of performance, giving users peace of mind in their investment.

In conclusion, the Maytag W10366206A presents a combination of durability, compatibility, innovative technology, and efficiency that make it a valuable component in any kitchen setting. Whether you are looking to maintain your appliance’s performance or make a simple upgrade, this replacement part stands as a testament to Maytag’s reputation for excellence. Investing in the W10366206A is choosing reliability and quality that consumers can trust.
Top Page Image Contents