Maytag W10366206A installation instructions Temperature and Moisture, Ice and Water

Page 17

■Sizzling/Gurgling - water dripping on the heater during defrost cycle

■Popping - contraction/expansion of inside walls, especially during initial cool-down

■Water running - may be heard when ice melts during the defrost cycle and water runs into the drain pan

■Creaking/Cracking - occurs as ice is being ejected from the ice maker mold.

The doors will not close completely

■Door blocked open? Move food packages away from door.

■Bin or shelf in the way? Push bin or shelf back in the correct position.

The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Freezer door closed completely? Firmly close the freezer compartment door. If the freezer compartment door will not close all the way, see “The doors will not close completely,” earlier in this section.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Refrigerator User Instructions Refrigerator SafetyUnpack the Refrigerator Installation InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Remove the PackagingLocation Requirements Clean Before UsingElectrical Requirements Recommended Grounding MethodConnect the Water Supply Water Supply RequirementsWater Pressure Reverse Osmosis Water SupplyStyle Complete the InstallationConnect to Refrigerator Remove and Replace Refrigerator Door Handles Standard Door Refrigerator Doors and DrawerFrench Doors Remove Door and Hinges Standard DoorReplace Door and Hinges Standard Door Reverse Door Standard Door optionalCabinet Refrigerator doorRemove and Replace Drawer Handle Remove and Replace Freezer DrawerRemove Drawer Front Replace Drawer FrontStandard Door Door Removal Replacement Door Swing Reversal optionalDrawer Front Removal Drawer Front Replacement Opening and Closing Doors Refrigerator USEDoor Closing and Door Alignment Digital Controls Using the ControlsElectronic Controls Additional Digital Control Center Features Fast Cool To Adjust Set Point TemperaturesDoor Alarm Reset FilterWater Dispenser Crisper Humidity ControlIce Maker Water Filtration System CleaningRefrigerator Care Refrigerator Operation TroubleshootingChanging the Light Bulb Ice and Water Temperature and MoistureWater dispenser will not operate properly Water Filter CertificationsWater is leaking from the dispenser system Water from the dispenser is warmApplication Guidelines/Water Supply Parameters Performance Data SheetsModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters Limited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverSécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurDéballage du réfrigérateur Instructions D’INSTALLATIONAvant de jeter votre vieux réfrigérateur ou congélateur Enlèvement des matériaux d’emballageSpécifications électriques Exigences demplacementMéthode recommandée de mise à la terre Pression de leau Raccordement de la canalisation deauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauRaccordement au réfrigérateur Achever l’installationDépose des portes et des charnières Porte standard Portes et tiroir du réfrigérateurPorte à deux battants Caisse Réinstallation Porte et charnières Porte standardPorte du compartiment de réfrigération Porte du compartiment de congélationDépose et réinstallation de la poignée du tiroir Retirer et réinstaller le tiroir du congélateurRéinstallation de la façade du tiroir Portes à deux battantsPorte standard Inversion du sens douverture de la porte facultatifPortes à deux battants Charnières supérieuresFermeture et alignement de la porte Commandes électroniques Utilisation des commandesUtilisation DU Réfrigérateur Ouverture et fermeture des portesAjustement des réglages de commande Commandes numériquesAjustement des réglages de commande numérique Pour ajuster les points de réglage de températureDoor Alarm avertisseur de la porte Temp Alarm alarme de dépassement de températureReset Filter réinitialisation du filtre Préférences de lutilisateur avec la commande numériqueDistributeur d’eau Machine à glaçonsMise en marche/arrêt de la machine à glaçons Taux de production des glaçonsNettoyage Entretien DU RéfrigérateurSystème de filtration de leau Fonctionnement du réfrigérateur Remplacement de l’ampoule d’éclairageDépannage Glaçons et eau Température et humiditéMauvais goût, odeur ou couleur grise des glaçons Les glaçons sont creux ou petitsLe distributeur deau ne fonctionne pas correctement ’eau coule du système de distributionSystème de filtration d’eau intérieur Feuilles DE Données SUR LA PerformanceModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Garantie Limitée Garantie DE Gros Appareil Ménager MaytagÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage Page Page Page W10366206A SP PN W10366207A

W10366206A specifications

The Maytag W10366206A is a highly regarded kitchen appliance, specifically designed as a replacement part for various Maytag appliances. This component showcases the brand's commitment to quality and durability, ensuring that it meets the demanding needs of everyday use in modern kitchens.

One of the standout features of the W10366206A is its robust construction. Made with high-quality materials, it is engineered to withstand the rigors of frequent operation, contributing to the longevity of the appliance it serves. This durability is a hallmark of Maytag, a brand known for its emphasis on reliability and performance.

The W10366206A is compatible with a range of Maytag models, which adds to its appeal. This versatility allows consumers to replace worn or damaged parts without the need to purchase an entirely new appliance. This not only saves money but also reduces waste, aligning with sustainable practices that many consumers value today.

In terms of technology, the W10366206A embodies innovative design. This part is designed with precision to ensure a seamless fit and effective operation within your kitchen appliance. Its design includes features that facilitate easy installation, making it a user-friendly option for those who might prefer to make repairs themselves.

Another important characteristic of the W10366206A is its efficiency. By ensuring that appliances operate at their optimal levels, this replacement part contributes to energy savings, which is increasingly important in today’s eco-conscious environment. With energy-efficient performance, consumers can expect to see reductions in utility bills while enjoying consistent service from their Maytag appliances.

Moreover, Maytag's commitment to customer satisfaction is evident in the extensive testing and quality control that the W10366206A undergoes before reaching consumers. This rigorous process ensures that every part meets high standards of performance, giving users peace of mind in their investment.

In conclusion, the Maytag W10366206A presents a combination of durability, compatibility, innovative technology, and efficiency that make it a valuable component in any kitchen setting. Whether you are looking to maintain your appliance’s performance or make a simple upgrade, this replacement part stands as a testament to Maytag’s reputation for excellence. Investing in the W10366206A is choosing reliability and quality that consumers can trust.
Top Page Image Contents