Module Temperature Protection
Every S-10G comes equipped with an internal fan to provide cooling to the unit. However, if any of the modules are operating above their specified maximum operating temperature, the S-10G will reduce the power to these modules. The S-10G will continue to monitor the operating temperature of the unit until the temperature is below the maximum operating temperature and then the S-10G will return the modules to normal operating.
Loopback Auto Detect
Perle S-10G media converters have the ability to automatically put remote Perle S-10G media converters in loopback mode. This allows the remote S-10G media converter to be located in distant or inaccessible locations. The remote S-10G will remain in loopback mode as long as the tests are in progress.
Note: Depending on the manufacturer some copper cabling may not support our Loopback Auto Detect feature, however Loopback Mode can always be obtained by setting switch 2 to the down position on your Perle Media converter.
Perle S- 10G Media Converter Installation Guide | 14 |
