Perle Systems S-10G-XTSH, S-10G-XTX manual Overview, Getting to know your S-10G Media Converter

Overview

This document contains instructions necessary for the installation and operation of the Perle S-10G Standalone Media Converters. The Perle S-10G Standalone Media Converters are 10 Gigabit Media Converters with two pluggable transceiver ports. The S-10G supports low power transceivers, whereas the S-10G-XTSH and the S10G- XTXH support high power (power level 4) transceivers.

Model	Port 1	Port 2
S-10G-STS	SFP+	SFP+
S-10G-XTS	XFP	SFP+
S-10G-XTSH	XFP	SFP+
S-10G-XTX	XFP	XFP
S-10G-XTXH	XFP	XFP

Note: The S-10G Media Converter must be populated with two 1G fiber/copper modules to operate at 1G.

Note2: When used with 1G modules, the S-10G does not support the Loopback Auto Detect feature.

Visit Perle’s web site for the most up to date Installation guides, models and specifications: http://www.perle.com/

Getting to know your S-10G Media Converter

Your S-10G Media Converter consists of the following items:

∙S-10G chassis with two pluggable transceiver ports

∙Grounding screws (for improved chassis grounding)

∙Country specific power adapter

∙Power cord strain relief clip

∙Four rubber feet

∙This guide

Perle S- 10G Media Converter Installation Guide 2