Perle Systems S-10G-XTS Attaching the Grounding Lug, Attaching the Power Cord Strain Relief Clip

∙Cross-head screwdriver (not provided)

Note: For your safety, when installing this equipment, always ensure that the chassis ground connection is installed first and disconnected last.

Attaching the Grounding Lug

1.Attach the grounding lug to one end of an 18-12 AWG wire.

2.Attach the grounding lug to the chassis and secure with the grounding screw(s).

Attaching the Power Cord Strain Relief Clip

1.Feed the power cord through the opening in the power cord relief clip.

2.Attach the power cord relief clip to the chassis and secure with the provided screw.

3.Plug the power cord into the AC power connector at the rear of the chassis.

4.Plug the other end of the power cord into an appropriate power outlet.

Perle S- 10G Media Converter Installation Guide 12